Aputure Light Storm Series Product Manual page 17

2.9) Factory Reset
Press the MENU button to enter the menu interface, rotate the Select wheel to
select and press to enter the Factory Reset interface. The factory settings are: fan is
in smart mode, light effect brightness value is 50%, normal mode brightness is
50%, Bluetooth mode is turned on, studio mode is turned off, dimming
curve-linear, DMX channel number 001, English, fireworks light effect, frequency 5.
2.10) Update
Press the MENU button to enter the menu interface, rotate the Select wheel to
select and press to enter the Update menu. You can update the firmware in the
Update interface, and view the firmware version number. Firmware updating can
also be done via Sidus Link app using OTA (Over the Air Technology).
-16-