Other Features; Set Alarm Timer; Set Sleep Timer; Listen Through Headphone - Philips DCD2030 User Manual

9 Other features

Set alarm timer

This unit can be used as an alarm clock. You can
select DISC, iPod/iPhone/iPad, playlist, TUNER
or USB as alarm source.
Note
‡
Make sure that you have set the time correctly.
1
In standby mode, press and hold
SLEEP/TIMER for three seconds.
» [TIMER SET] WLPHU VHW VFUROOV RQ WKH
display.
» [SELECT SOURCE] VHOHFW VRXUFH
scrolls on the screen.
2
Press SOURCE repeatedly to select a
source: DISC, USB, TUNER.
3
Press SLEEP/TIMER WR FRQÀUP
» The hour digits are displayed and begin
to blink.
4
Press / repeatedly to set hour, then
press SLEEP/TIMER DJDLQ WR FRQÀUP
» The minute digits are displayed and
begin to blink.
5
Press / to set minute, then press
SLEEP/TIMER WR FRQÀUP
» VOL YROXPH LV GLVSOD\HG DQG EHJLQV
to blink.
f Press
/ to adjust volume, then press
6/((37,0(5 WR FRQÀUP
»
is displayed.
» To deactivate alarm timer, press
SLEEP/TIMER again.
24 EN
All manuals and user guides at all-guides.com
Note
‡
Alarm timer is not available in MP3 LINK mode.
‡
If DISC/USB source is selected and the track cannot be
played, tuner is activated automatically.

Set sleep timer

1
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a time
SHULRG LQ PLQXWHV 
» When sleep timer is activated,
displayed.
» To deactivate sleep timer, press
SLEEP/TIMER again until

Listen through headphone

Plug a headphone into the
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the MP3 link cable to:
‡ the MP3 LINK socket
‡ the audio output jack (usually
KHDGSKRQH MDFN RI WKH H[WHUQDO
device.
2
Select MP3 LINK source.
3
Play the device.
is
disappears.
socket.