GE Profile PK956SMSS Dimensions And Installation Information

PK956SM
GE Profile 27" Built-In Convection/Thermal Wall Oven
™
Dimensions and Installation Information
KW Rating
240V
6.8
208V 5.1
Breaker Size
240V 30 Amps
208V 30 Amps
Note: Cabinets installed adjacent to wall ovens
Locate
junction box
must have an adhesion spec of at least a 194°F
for 24"models
temperature rating. For 27" built-in single ovens, 56" MIN. above
cutout floor
if marks, blemishes or the cutout opening is visible
10
above the installed oven, it may be necessary to add
Allow 3/4"
A
for overlap
wood shims under the runners and front trim until
over all edges
the marks or openings are covered.
of cutout
Note: Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
C
placed to avoid interference with the handle.
Electric wall ovens are not approved for
B
installation with a plug and receptacle.
They must be hard wired in accordance with
D
installation instructions.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
E
Conduit
(48-1/2" Long)
2" X 4" or
For answers to your Monogram,
equiv. runners
GE appliance questions, visit our website at
(cutout floor) ®
21" MIN.
ge.com or call GE Answer Center
door opening
allowance
800.626.2000.
Suitable
bracing
to support
runners
G
Cabinet
A – Cabinet width required
21
B – Minimum cabinet depth
C – Opening width
GE Profile or
® ™
D – Opening height
F
E – Recommended minimum cutout location from floor
Oven
service,
®
F – Overall depth*
G – Overall height with trim
Overall height without trim
H – Overall width
*Depth including door handle is approximately 26-7/10" min. to 26-8/10" max.
Locate
j unction box
for 27"models
either 5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
Access
from
adjacent
cabinet
required
2" x 4" or
C L
equivalent
runners
Minimum
cutout location
from floor
Dimension and installation information are shown in inches.
18"
Over centerline
of cabinet
(must support 300 lbs.)
27"
27" min.
23-5/8"
25" min. - 25-1/4" max
50-1/8" max
13-1/4"
23-5/8"
51-7/8" - 52-3/4"
51"
26-5/8"
Locate
junction box
for 24"models
56" MIN. above
cutout floor
10
Allow 3/4"
A
for overlap
over all edges
of cutout
C
B
D
G
E
Conduit
(48-1/2" Long)
2" X 4" or
F
equiv. runners
(cutout floor)
21" MIN.
door opening
allowance
Listed by
Underwriters
Laboratories
Specification Created 1/07
Suitab
bracin
to suppo
runne
Cabinet
A – Cabinet w
21
B – Minimum
C – Opening
D – Opening
E – Recomm
Oven
F – Overall d
G – Overall h
Overall h
H – Overall w
*Depth includi
220359