Operating Instructions - Air innovations CLEAN MIST AI-101 Instruction Manual And Warranty Information

Operating Instructions

SMART Control Panel
Mist Humidistat Timer
Settings Settings
ON / OFF
Touch the button to turn the humidifier on. When turned ON, it will default to the Low
mist setting, the ambient humidity will be displayed, and the LED Light Bar will illuminate
in white. The Light Bar will change to red to indicate the water level is getting low and
should be refilled.
MIST OUTPUT
There are four mist settings on the humidifier: Low, Medium, High and Night Mode.
Simply press the button to toggle through the settings.
Night Mode will run the humidifier on Low and and all lights will turn off after 5 seconds.
Hold the button for a few seconds to turn the unit completely off.
TIMER
This unit features a convenient timer function in 2hr, 4hr and 6hr increments. Press the
button to choose the desired time.
HUMIDISTAT
This unit is factory set to 60% relative humidity. When the unit is turned on, the current
ambient humidity of the room will be displayed. Press the button and "60" will flash
for 5 seconds, indicating the factory setting of the Humidistat. To adjust the humidity
level press and while the relative humidity is flashing, adjust the level DOWN by
pressing or adjust the level UP by pressing . The unit will remember this setting if
turned off; it will revert back to 60% if unplugged. Settings range from 40-90% relative
humidity, in 5% increments. While 40-60% relative humidity is recommended, room size
will affect humidity level. If you wish to turn the Humidistat feature off, press and hold the
button for a few seconds, until the display goes out.
5 5