Related Manuals for ProSound 800
Summary of Contents for ProSound 800
- Page 1 Prosound 800, 1000, 1600 Professional Power Amplifier Manual www.maplin.co.uk...
- Page 2 Service All ProSound products are thoughly examined and tested before leaving the factory, and if a correctly used will give many years of excellent service. However, if a problem arises, proceed as follows: A) Contact the retailer from whom the unit was purchased and describe the symptoms of the fault.
-
Page 3: Technical Specification
Amp care bullet points. TECHNICAL SPECIFICATION Amp care bullet points. Model 1000 1600 Rated Output Power (RMS) Stereo mode, 2 x 8Ω 150W ×2 200W × 2 250W × 2 load 1. Read the manual ; understand the operation, limitations and safety instructions before using the product Stereo mode, 2 x 4Ω... -
Page 4: Troubleshooting
TROUBLESHOOTING IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS WARNING - Using electric product, basic precautions should always be followed, including the following: 1. Read all the SAFETY INSTRUCTIONS before using the product. FAULT PROBLEM SOLUTIONS... -
Page 5: Main Features
• NEVER cover the amplifiers, as they may overheat. • Prosound power amplifiers are designed to fit standard 19” racks, with a 2U height and 17” depth. We recommend the use of rear rack supports, especially if the rack is to be mobile. Use shakeproof washers or threadlock adhesive to prevent mounting bolts becoming loose in transit. -
Page 6: Operation
OPERATION 9. Bridge LED. This LED illuminates to show that mono bridge mode has been selected on the rear panel. Channel A level only is active, and speaker loads should be connected for bridge mode operation as described below. Front panel features 10.
Need help?
Do you have a question about the 800 and is the answer not in the manual?
Questions and answers
How many speaker does prossound 1600 bullet amp operate maximum .
The ProSound 800 amplifier can operate in stereo mode at 8Ω with 2 x 150W output, at 4Ω with 2 x 300W output, and in bridge mode at 8Ω with 400W output. The number of speakers it can handle depends on their impedance and wiring configuration. However, the exact maximum number of speakers is not specified in the provided information.
This answer is automatically generated