Beko BEKOMAT 12i Original Installation And Operation Manual page 56

BEKOMAT ® 12i / 12i CO / 12i CO PN63
Illustration
26 E
56 | 76
Wear part replacement
9
10
11
16
39
14
12
22
14
15
Original installation and operation manual
Description / explanation
14. Insert the solenoid coil [39], the control-air cover [11]
and the washer [10] onto the core guide pipe [16] .
15. Screw the nut [9] onto the core guide
pipe [16] and tighten with a torque of
2 Nm +0.5 Nm (1.48 ft-lb +0.37 ft-lb).
16. Attach the completed valve unit [E]
to the housing [26]. Insert the
screws [12, 22] and tighten with a torque of
1.5 Nm +0.5 Nm (1.11 ft-lb +0.37 ft-lb).
17. Insert the solenoid valve connector [14] onto the
solenoid coil [39].
18. Insert the screw [15] into the solenoid valve
connector [14] and tighten with a torque of
1 Nm +0.2 Nm (0.74 ft-lb +0.15 ft-lb).