Summary of Contents for Nywint DT-DJ7A
- Page 1 DT-DJ7A Audio Phone User Manual Read this manual carefully before using the product, and keep it well for future use. ...
-
Page 3: Parts And Functions
1. Parts and Functions Key functions Press it to release the door; Unlock button In setup mode, press it to exit the setup state. In standby mode, long press it to enter setup mode; During called state, press it to communicate hands Talk button free with visitor;... -
Page 4: Terminal Descriptions
2. Terminal Descriptions SW+ SW- SW+ SW- L1, L2: Bus terminal. SW+, SW-: Door bell call button connection port. DIP: Bit-1~7: Used to User Code setting or Extended Address setting(Bit-10 set to ON). Bit-8~9: Used to Slave Monitor Address (Bit-10 set to OFF). Bit-11: Set to ON if the monitor is at the end of the line;Otherwise, set to OFF. -
Page 5: Setup Instructions
4. Operation Instructions 1) Door release function: When visitor calls from outdoor station, the monitor rings, press Talk button to talk with the visitor, then press the Unlock button to open the door. If the system connect 2 locks, press Call button/Unlock 2nd button to open the second door. - Page 6 Bit State User Code Bit State User Code Bit State User Code Code=6 Code=17 Code=28 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 Code=7 Code=18 Code=29...
- Page 7 5.2.2 When Bit-10 set to ON, the Bit-6~7 are used to extended address setting: Bit State User Code Bit State User Code Code=1 Code=65 1 2 3 4 5 6 7 1 2 3 4 5 6 7 Code=2 Code=66 1 2 3 4 5 6 7 1 2 3 4 5 6 7 Code=31...
- Page 8 ● Working Temperature: -15ºC ~ +45ºC; ● Wiring: 2 wires, non-polarity ● Dimension: 3.55(H)X5.43(W)X0.69(D)inch FOR TECHNICAL SUPPORT CALL 1516-387-6606 FROM 9AM TILL 4PM MONDAY THRU FRIDAY OUR WEBSITE WWW.NYWINT.COM . Right to interpret and copyright of this manual are preserved.
Need help?
Do you have a question about the DT-DJ7A and is the answer not in the manual?
Questions and answers