Code 39 Code Page - NCR K150 Programming Manual

Symbologies

Code 39 Code Page

Code pages define the mapping of character codes to characters. If the data received does
not display with the proper characters, it may be because the bar code being scanned was
created using a code page that is different from the one the host program expects.
Follow the steps below to select the appropriate code page.
1. Scan the bar code below.
Code 39 Code Page
2. Refer to the "Code Page Mapping of Printed Bar Codes" section of Appendix A,
select the code page with which the bar codes were created.
3. Refer to the "Programming Chart" section in the "Samples and Programming Chart"
chapter in this book, scan the value corresponding to appropriate bar code.
4. Refer to the "Programming Chart" section in the "Samples and Programming Chart"
chapter in this book, scan the Save bar code to save the changes.The data characters
should then appear properly.
4-14
NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
B005–0000–2166