Craftsman 247.24019 Operator's Manual page 14

15. Install the chute tube extension onto the chute elbow by lining up
the tabs and sliding the adapter over the chute elbow, as in Fig.
26. Secure the chute adapter by stretching the chute strap and
Flange
hooking it onto the grass-catcher pin previously installed.
ASSEMBLY AnD InSTALLATIOn
Figure 26
Figure 27
16. Peel the backing off of the self-adhesive foam strip (721-04388)
that has been included with your grass collector. Apply it to the
upper chute, flush against the flange as shown in Fig. 27.
17. With the grass catcher cover open, install the discharge chute
over the chute extension tube, as seen in Fig. 28, and rest the
top end into the upper chute support installed on the right-hand
side of the bin support assembly. See Fig. 29.
14
Figure 28
Figure 29