5 Useful tips
FAQ
Question
My remote does not work.
What should I do?
How come the initial setup appears every
time I turn on this unit?
Why can I not watch some RF signal TV
programs?
How come there is no image from the
connected external devices?
When I enter a channel number, why does
it change automatically?
Why are captions not displayed entirely?
Or why are captions delayed behind the
dialog?
How can I set the clock?
●
Check the antenna or cable connection to the main unit.
●
Check the batteries on the remote.
●
Check if there is an obstacle between the infrared sensor window and the remote.
Test the IR signal output use IR signal check. L p. 37
●
If okay, then possible infrared sensor trouble.
●
Aim the remote directly at the infrared sensor window on the front of the unit.
●
Reduce the distance to the unit.
●
Re-insert or replace the AAA batteries with their polarities (+/–) as indicated on the remote battery
area.
When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote
●
signal on this unit. Move the infrared-equipped device away from this unit, change the angle of the
device's infrared sensor or turn off the infrared communication function.
●
Make sure to complete the initial setup before the unit goes into standby mode.
●
The selected channel may not be broadcasting.
The selected channel cannot be viewed by the Parental Controls setting. L p. 24
●
●
The unit requires some kind of antenna input. An indoor antenna (Digital or VHF / UHF), an external
antenna (Digital or VHF / UHF) or an RF coaxial cable from your wall cable or set-top box needs to
be plugged into the unit.
Check if the correct input is selected by pressing w (INPUT). L p. 18
●
●
Check the antenna, cable or other input connection to the unit.
Many digital channels have alternate channel numbers. The unit changes the numbers automatically
●
to the ones signifying the broadcasting station's channel number. These basic numbers used for the
previous analog broadcasts. (e.g., input digital ch# 30 automatically changes to digital ch# 8.1)
●
Closed captions that are delayed a few seconds behind the actual dialog are common for live
broadcasts. Most captioning production companies can display a dialog to maximum of 220 words
per minute. If a dialog exceeds that rate, selective editing is used to insure that the closed captions
remain up-to date with the current TV screen dialog.
●
From the Android TV home screen, select Settings in the upper right of the screen.
Scroll down to Device Preferences and select Date & time.
Please set it automatically or manually.
Answer
34
.
English
Continued on next page.