Software Linkload Commands
Deleting an Installed NIU/SCM Release
This command is used to delete an installed NIU or SCM release from the RF-C! hard drive.
1.
From the NIU/SCM Software Linkload screen, use the
left of the listing
Figure 6-3).
Figure 6-3: NIU/SCM Software Linkload Screen—Delete an Installed NIU/SCM Release
The Delete an Installed NIU/SCM Release screen appears with a list of installed releases
(see Figure 6-4).
6-4
Delete an Installed NIU/SCM Release
6880494G55-O
RF-Conductor! Controller NIU Remote Configuration
to position the cursor to the
<tab>
and press:
<Return>
(see
May 1998