Connecting Projector; Terminals Of Projector - Canon LV-7575 User Manual

CONNECTING PROJECTOR

This projector has input and output terminals on its back for connecting computers and video equipment. Refer
to the figures on pages 12–14 and connect properly.
COMPUTER AUDIO INPUT 1/
AUDIO MONITOR OUTPUT
JACK
This terminal is switchable and
can be used as Computer
Audio Input 1 or Audio Monitor
Output (variable).
Set up the terminal as either
Computer Audio Input 1 or
Audio Monitor Output properly
before using this terminal.
(See pages 13, 24.)
Note: This terminal does not
output audio from INPUT 3.
USB CONNECTOR (Series B)
When controlling a computer
with the remote control unit of
this projector, connect USB
terminal of your personal
computer to this terminal. (See
page 13.)
RESET BUTTON
This projector uses a micro
processor to control the unit, and
only occasionally, this micro
processor may malfunction and
need to be reset. This can be done
by pressing the RESET button
with a pen, which will shut down
and restart the unit. Do not use
the RESET function excessively.
5 BNC INPUT JACKS
Connect component video
output (Y, Cb, Cr or Y, Pb,
Pr) from video equipment to
VIDEO/Y, Cb/Pb, and Cr/Pr
jacks or connect computer
output {5 BNC Type (Green,
Blue, Red, Horiz. Sync, and
Vert. Sync.)} from computer
to G, B, R, H/V, and V jacks.
(See pages 13–14.)
12

TERMINALS OF PROJECTOR

COMPUTER INPUT/MONITOR
OUTPUT TERMINAL (ANALOG)
This terminal is switchable and
can be used as Computer Input
or Monitor Output. Set up the
terminal as either Computer
Input or Monitor Output properly
before using this terminal.
(See pages 13–14, 24.)
Note: This terminal outputs from the
5 BNC type computer input on
INPUT 2 jacks only.
RGB ANALOG IN/OUT
AUDIO 1
IN/OUT
G
VIDEO/Y
VIDEO/Y Cb/Pb
VIDEO INPUT JACKS
Connect composite video
output from video equipment
to VIDEO/Y jack or connect
component video outputs to
VIDEO/Y, Cb/Pb, and Cr/Pr
jacks. (See page 14.)
COMPUTER INPUT
TERMINAL (DIGITAL)
Connect a computer output
(Digital DVI-D type) to this
terminal.
The HD (HDCP Compatible)
signal can also be connected.
(See page 13.)
INPUT 1
RGB DIGITAL
R/C JACK
CONTROL PORT
RESET
AUDIO 2
B R H/V V
Cb/Pb Cr/Pr
INPUT 2
S–VIDEO
Cr/Pr R–AUDIO–L
( MONO )
INPUT 3
AUDIO INPUT JACKS
Connect an audio output
from video equipment to
these jacks. (See page 14.)
COMPUTER AUDIO
INPUT 2 JACK
Connect an audio
output (stereo) from a
computer to this jack.
(See page 13.)
R/C JACK
When using the Wired/
Wireless remote control unit
as wired, connect the Wired
remote control unit to this
jack with an Audio cable
(Mini Plug [stereo]; not
supplied).
CONTROL PORT CONNECTOR
When controlling a computer
with the remote control unit
of this projector, connect the
mouse port of your personal
computer to this connector.
(See page 13.)
S-VIDEO INPUT JACK
Connect S-VIDEO output
from video equipment to
this jack. (See page 14.)