In T-BAR Mode:
Press a green button to set the source as the PVW, the source button will blink green.
Slide the T-BAR to switch/mix from the current PGM source to the PVW source.Any MIX
transition effect will be applied as the T-BAR is moved. Once the T-BAR has been fully transitioned, the indicator
lights on sources buttons that are PGM and PVW will be swapped.
Note: Source selection is locked when T-BAR is in transition (not entirely docked at a left or right position)
XPOSE mini Operation
Install dedicated software named XPOSE to
control mini or mini+.
Right click the setup exe file .
Choose Run as administrator to open the
exe and install the software.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
Switch Source via Button
Switch Source via T-BAR
support@rgblink.com
|
www.rgblink.com
11 / 29