Presetting Radio Stations; Performing A Dab Initial Scan Manually - Sony CMT-G2NIP Operating Instructions Manual

When you tune in an FM station that provides
RDS services or a DAB/DAB+ station, the
service name or station name appears on the
display.
To reduce static noise on a weak FM stereo
station
Press FM MODE repeatedly until "MONO" lights
up to turn off stereo reception.
Tip
For better broadcast reception, try changing the direction
or location of the antenna. For example, position the
antenna near or outside a window. If the reception does
not improve, try connecting an external antenna (not
supplied). Keep the antenna away from the power cord to
avoid picking up noise.
Notes
•
When tuning in a DAB/DAB+ station, it may take a few
seconds before you hear any sound.
•
When tuning in a DAB/DAB+ station, primary service
is automatically received when secondary service ends.
Other operations
To Do the following:
View information Press DISPLAY repeatedly.
such as the frequency
of the current station
Select different Press ./> repeatedly
stations to select the desired station.
Press the corresponding
numeric button on the
remote to select the preset
number of the desired
station.

Presetting radio stations

By presetting radio stations, you can easily reselect
them using the corresponding preset number. You
can preset up to 20 FM stations, 10 AM stations
and 20 DAB stations.
1
Tune in the desired station.
2
Press MEMORY.
The preset number currently being selected
flashes.
3
Press M/m to select the desired
preset number.
If another station is already assigned to the
selected preset number, that station is
replaced by the new station.
4
Press ENTER.
"Complete!" appears, and the station is
preset.
To select a preset radio station
Press TUNING MODE repeatedly until
"PRESET" appears, then press +/– repeatedly to
select the desired preset number.
Tip
During DAB/DAB+ reception, secondary services can
also be preset.
Note on presetting DAB/DAB+ stations
You can preset a DAB/DAB+ service only when it can be
received.
Performing a DAB Initial
Scan manually
When you turn on the system for the first time after
purchase, the DAB Initial Scan starts to
automatically store available DAB/DAB+ service
information. When you have moved to another
area, perform the DAB Initial Scan manually to
update the DAB/DAB+ service information.
1
Press TUNER repeatedly to select
the DAB function.
31 GB