Sony PS-LX300USB Operating Instructions Manual page 19

For Windows Vista

([Control Panel] is in the [Control Panel Home] view)
1
Select [Control Panel] from the [Start]
menu.
2
Select [System and Maintenance].
3
Select [Device Manager].
4
Check the [Device manager] screen.
Check the devices installed as follows.
– [USB Human Interface Devices] and [HID-
compliant consumer control device] under
[Human Interface Devices]
– [USB Audio CODEC] under [Sound, video and
game controllers]
– [USB Composite Device] under [Universal Serial
Bus controllers]
For Windows 7

([Control Panel] is in the [Category] view)
1
Select [Control Panel] from the [Start]
menu.
2
Click [Hardware and sound].
3
Click [Device Manager] in [Devices and
Printers].
4
Check the [Device Manager] screen.
Check the devices installed as follows.
– [HID-compliant consumer control device] and
[USB Input Device] under [Human Interface
Devices]
– [USB Audio CODEC] under [Sound, video and
game controllers]
– [USB Composite Device] under [Universal Serial
Bus controllers]
Notes
When connecting to different USB ports, you may

have to install USB drivers.
When connecting to different USB ports, the

computer automatically installs the driver again. In
such case, check that the driver is correctly installed
as in this procedure.
The recorded sound is disrupted.
The CPU of your computer is overloaded.

Exit other applications.
Other USB devices are connected to your

computer and being operated simultaneously.
Quit operating other USB devices.
You cannot record sound to your computer
from the turntable, or the sound is
distorted.
The audio recording device of your computer

is not set correctly. See pages 11 – 14 to check
the device settings.
The signal input level exceeds the

recommended setting range; adjust it (see
page 12).
There is noise in recorded sound.
There are electrical wires, fluorescent

lights or mobile phones near the turntable.
Move away from any possible sources of
electromagnetic interference.
The supplied software does not launch.
Thirty days have passed since the software

was installed, and user registration has
not been completed. Complete the user
registration.
You are being asked to enter the serial
number in the startup screen of the
supplied software.
Installation has failed. Uninstall the software,

and then reinstall it. If you are running
resident software such as antivirus software,
shut it down while installing the supplied
software.
Notes
For details on the operation of your computer, refer to

the operating instructions of your computer.
There can be some breakdowns that cannot be solved

even with Troubleshooting. In such cases, contact your
nearest Sony dealer.
1
GB