Maintenance; Scheduled Maintenance Table - Nilfisk-Advance SC3000 Service Manual

Service Manual – SC3000

Maintenance

The lifespan of the machine and its maximum operating safety are ensured by correct and regular mainte-
nance
Warning! Read carefully the instructions in the Safety chapter before performing any
maintenance procedure.
The following tables provides the scheduled maintenance The intervals shown may vary according to particu-
lar working conditions, which are to be defined by the person in charge of the maintenance.
For instructions on maintenance procedures, see the following paragraphs

Scheduled Maintenance Table

Procedure
Battery charging
Squeegee cleaning
Brush/cylindrical brush cleaning
Tank, debris collection grid and vacuum grid with float
cleaning, and cover gasket check
EcoFlex™ system cleaning and draining (optional)
Squeegee blade check and replacement
Side skirt check (only for BR 752C)
Solution filter cleaning
Vacuum system motor filter cleaning
Battery (WET) fluid level check
Screw and nut tightening check
Check and adjustment of driving belts between motors
and cylindrical brushes (only for BR 752C)
Electromagnetic brake efficiency check
Brush/pad-holder motor carbon brush check or
replacement
Vacuum system motor carbon brush check or
replacement
Drive system motor carbon brush check or replacement
(1) And after the first 8 working hours.
Daily, after using
Weekly
the machine
General Information
Every six
Yearly
months
(1)
19