Table of Contents
Advertisement
Blue Blinks: Blinking frequency indicates the system's signal quality. More frequently it
blinks, worse the signal quality is.
Slow Blue Blinks: Receiving 95% to 99% data package.
Blue Blinks (every 3/5 second): Receiving 50% to 75% data package.
Blue Blinks (every 3/10 second): Receiving 25% to 50% data package.
Blue Blinks (every 1/25 second): Receiving less than 25% data package.
Double Blue Blinks: Failsafe set successfully.
Blue-Red Blinks: Air unit overheat alert, level one.
Blue-Red Blinks: Air unit overheat alert, level two.
Blue-Red Blinks: Air unit overheat alert, level three.
1.5.2 Air Unit Indicator
Solid Red: No communication between transmitter and receiver.
Fast Red Blinks: Ground unit is binding to air unit.
Slow Red Blinks: RF Firmware does not match.
Triple Red Blinks: FPV initialization failed.
Slow Red-Blue-Yellow Blinks: FPV is starting.
Fast Red-Blue-Yellow Blinks: Firmware updating.
Yellow Blinks: Air unit low voltage alert (voltage input lower than 12V).
Solid Blue: Perfect communication, 100% data package received.
Blue Blinks: Blinking speed indicates the system's signal strength. More frequently it
blinks, worse the signal quality is.
15
2021 SIYI Technology, All Rights Reserved
HM30 User Manual V1.0
- Quick Links:
- Ports on Hm30 Air Unit
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HM30 and is the answer not in the manual?
Questions and answers
Как его забиндить без провода к МК15 Receiven полетник
To bind the SIYI HM30 to the MK15 receiver, power on the air unit and the ground unit (MK15), then perform the wireless binding process. No wires are needed for the binding itself.
This answer is automatically generated