Page 2
CONTENTS Safety Instructions Safety Instructions, Safety Symbols Specification Information Requirements for Electric Local Space Heatr Foot Assembly, Controls Operation, Bulb Replacement, Cleaning & Care Troubleshooting Specification Warranty...
Page 3
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE INTENDED USE. or property. CABLES AND PLUGS. This 1850W Stove Heater designed for light domestic use only. It is not intended Check to ensure your electricity supply for heavy duty, commercial or industrial matches that shown on the rating label of use, and is not suitable for use outdoors.
Page 4
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE off. allowing it to cool. RISK OF PERSONAL INJURY. POSITIONING YOUR HEATER. Use this appliance only as described in This appliance is designed to be this manual. placed on a hard, level surface. When Do not use this appliance with any type of positioning, please keep the following external timer.
Page 5
SPECIFICATION BULB VOLTAGE POWER TYPE 220-240V ~50Hz 1850 1. Door 2. Fire Display 3. Legs x4 4. Control Panel (behind panel)
Page 6
INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATER Model 2514011 Item Symbol Value Unit Item Unit Type of heat input for Electrical Storage Heaters Heat Output only (select one) Nominal Heat Manual heat charge control with 1.85 Output integrated thermostat. Minimum Heat Manual heat charge control with room 0.925...
Page 7
FOOT ASSEMBLY Take the Heater and turn it upside down, ensure to lift the Heater carefully, do not tip. Take the 4 legs and align over the holes in the base of the Heater. Screw in each screw and ensure the feet are secured, turn the Heater upright onto its legs.
Page 8
OPERATION Insert the plug into mains socket. Turn down the Thermostat Control Knob to the desired temperature by turning anticlockwise. TO ACTIVATE THE HEATING FUNCTION: Turn the Thermostat Dial to maximum by turning Close the door once you have finished adjusting the clockwise and switch on the Fan Switch.
Page 9
TROUBLESHOOTING PROBLEM SOLUTION Possibly a bulb failure. Remove the faulty bulb as NO LIGHT FROM THE FLAME EFFECT detailed in the ‘Bulb Replacement’ section. Check that the Heat Switches are set to on position. LIGHT BUT NO HEAT Ensure the Heater is switched on and connected to mains power.
Page 11
This does www.Vonhaus.com/warranty. not affect your statutory rights. Please retain a proof of purchase receipt or No rights are given under this warranty to a statement as proof of the purchase date.
Page 12
Thank you for purchasing the 1850W Black Stove Heater. VonHaus is a registered trademark of DOMU Brands Ltd ® Made in China for DOMU Brands Ltd M24 2RW...
Need help?
Do you have a question about the 2514011 and is the answer not in the manual?
Questions and answers