Do you have a question about the X3 and is the answer not in the manual?
Questions and answers
Summary of Contents for Garaventa Lift X3
Page 1
PART 1 3REFERENCES ASME A17.5 - Elevator and Escalator Electrical Equipment. ASME A18.1a 2001 - Safety Standard for Platform Lifts and Stairway Chairlifts. ASME A18.1, Section 6, Private Residence Inclined Platforms. X3 Specification 23265-A-DS Section 14 42 13 Page 1...
Page 2
Provide platform lifts in compliance with: 1.CSA B355 - Lifts for Persons with Physical Disabilities. 2.CSA B44.1/ASME A17.5 - Elevator and Escalator Electrical Equipment. 3.CSA - National Electric Code. PART 1 7DELIVERY, STORAGE, AND HANDLING X3 Specification 23265-A-DS Section 14 42 13 Page 2...
Page 3
Section 01600. PART 2 2STAIR LIFT FOR STRAIGHT STAIRWAYS Inclined Platform Lift: Garaventa Lift Stair-Lift Model X3 to serve one flight of straight stairs, with two landings and two stops. Lift consists of an extruded aluminum guide rail, a folding platform that is moved along the guide rail by an integrated rack and pinion drive system, overspeed safety system and call stations at each landing.
Page 4
4 lb/f (20 N) of pressure is encountered from either inside or outside of the platform. Platform is permitted to travel in the opposite direction of obstruction to allow clearing. 10. Platform Kick Plate: X3 Specification 23265-A-DS Section 14 42 13 Page 4...
Page 5
(11.9 kg/m) with integrally mounted zinc plated gear rack. Lower Rail: 1-1/2 inches (38 mm) by 2-1/2 inches (64 mm) anodized aluminum extrusion. Rail Mounting: Direct Mount Solid Walls: Rails directly mounted to the stairway wall. X3 Specification 23265-A-DS Section 14 42 13 Page 5...
Page 6
Steel cabinet and door panel. Available only in Satin Gray, left hinged only. Size: Height 45-3/8 inches (1151 mm), width 20 inches (508 mm), depth 11 inches (279 mm). PART 3 EXECUTION PART 3 1EXAMINATION X3 Specification 23265-A-DS Section 14 42 13 Page 6...
Page 7
Schedule tests with agencies and Architect, Owner, and Contractor present. PART 3 5PROTECTION Protect installed products until completion of project. Touch-up, repair or replace damaged products before Substantial Completion. END OF SECTION X3 Specification 23265-A-DS Section 14 42 13 Page 7...
Need help?
Do you have a question about the X3 and is the answer not in the manual?
Questions and answers