Advertisement
Fuel Tank Light Indicator Battery Replacement
This covers the following models (Read completely before performing service):
• 100306
• 100402
• 100414
• 100565
• All other 2000W Clamshell Models
Follow the instructions below to replace the battery cell for the Fuel Tank Light Indicator for 2000W Clamshell
Inverters,
1. Use a small screwdriver to
disassemble the upper cover. Note:
There is a notch on both sides to
allow access with a screwdriver.
2. Move the round copper cover plate
and remove the battery cells.
11/29/18
Technical Bulletin
Number: 181128-60-20-1
Date: 11-28-18
1
Champion Power Equipment, Inc.
Advertisement
Table of Contents
Related Manuals for Champion Power Equipment 100306
Summary of Contents for Champion Power Equipment 100306
- Page 1 1. Use a small screwdriver to disassemble the upper cover. Note: There is a notch on both sides to allow access with a screwdriver. 2. Move the round copper cover plate and remove the battery cells. 11/29/18 Champion Power Equipment, Inc.
- Page 2 If you have any questions regarding the previous procedure, please contact our technical department Monday-Friday from 8:30 AM-5:00 PM PST at 877-338-0999. If you have any questions, please contact Champion Power Equipment: Champion Power Equipment, Inc. 12039 Smith Ave.
Need help?
Do you have a question about the 100306 and is the answer not in the manual?
Questions and answers