User Controls - Acer QG241Y User Manual

USER CONTROLS

Base Controls
Note: The location and names of the function buttons and power button on
the monitor may vary according to monitor model, and some button may not
available for some models.
Type 1
Type 2
Type 3-1
Type 3-2
No.
1 Go to the main menu.
2 Enter the source mode.
HotKey 1, 2 buttons. Press to activate user defined
3/4
hotkey function.
In the powered-off state, pressing the button powers on
the device; in the powered-on state, pressing the button
5
normally enters the mode switching menu, and long-
pressing for 3 seconds powers off the device.
No.
1 Enter the mode switching menu.
2 Enter brightness adjustment.
3 Enter the source mode.
4 Go to the main menu.
5 Power on/off.
No. Item
Power button/
1
indicator
Hotkey 1, 2
2
buttons
3 Input button
4 Navi/OK button
No. Item
Menu/Navi/OK
1
button
12
Description
Description
Description
Turns the monitor on/off. Blue
indicates power on. Amber indicates
standby/power saving mode.
Press to activate user defined hotkey
function.
Press to toggle input sources.
Press to activate the OSD menu, then
use it as directional key to highlight
the desired function.
Press it again to enter a selection.
Description
Power on/Long press to Power off.
Enter the main menu, Select/Adjust
menu options.