Table of Contents
Advertisement
• When in use ensure that your Aroma Diffuser is not near any
items which could be contaminated with the mist that is
being emitted from the device.
• Note that some pets may be affected by some essential oils.
Before use check with a qualified person.
• Due to the increase of humidity in the air, this may encourage
the growth of biological organisms.
• Ensure that any moisture or dampness around the unit is
wiped away. Do not allow any absorbent materials around
the Aroma Diffuser to become damp.
• When not in use, ensure that any water is drained from the
unit.
• Make sure that the unit is empty of water and cleaned before
storing.
• Make sure that the water is replaced and the cup cleaned
every 3 days. If this is not done, there is a possibility of micro-
organisms breading and causing potential health issues.
• When used consistently, drain water from the unit and clean,
removing any scale, deposits or film which may have built up.
Refill with clean water.
• This unit emits water vapour, take care when using.
Description of the Aroma Diffuser
(Refer to the
1 Main Parts of Your Aroma Diffuser on page 1).
Your Aroma Diffuser consists of the following parts:
1. Power Cable
2. AC Adaptor
3. Power input
4. Lid
5. Water Cup
6. Maximum mark
7. Ultrasonic Membrane
8.
On/Off button
9.
Light control button
10. Air outlet opening (When filling make sure that no water
enters this opening)
11. Fan
Controls
On/Off button (item 8)
To turn the unit on and off use the
the side of the unit and requires a simple push to turn on. When
the
button is pressed it will click. Press once to turn on, press
again to turn off.
Light button (item 9)
It is possible to control the intensity of the light by pressing the
light
button. This button operates as below if the light is on.
1. Press once – light dims.
2. Press again – light turns off.
3. Press again – light turns on at maximum level.
4. Pressing the
button repeats 1 to 3 as above.
EN
button this is located on
Advertisement
Table of Contents
