BELINEA 101830 Service Manual
  1. Manuals
  2. Brands
  3. BELINEA Manuals
  4. Monitor
  5. 101830
  6. Service manual

BELINEA 101830 Service Manual

18"
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
18" LCD Colour Monitor - Maxdata(101830)
Service
Service
Service
DDC/Power saving/Auto Picture Adjustment
Description
Important Safety Notice ---------------------------------- 2
Technical Data ------------------------------------------ 3~4
Connection to PC, Front Control------------------------ 5
Setting using the OSD Menu----------------------------- 6
Failure Mode of LCD Panel-------- -- -------------------- 7
Troubleshooting---------------------------------------------8
Clock&Phase Adjustments--------------------------------9
OSD Lock/Unlock--- --------------------------------------10
Aging Mode------------------------------------------------- 11
Factory Mode---------------------------------------------- 12
Warning and Notes----------------------------------------13
DDC Instructions------------------------------------- 14~20
DDC Hex Data---------------------------------------- 21~22
Wiring Diagram-------------------------------------------- 23
Electrical Instructions-------------------------------- 24~25
Repair Flow Chart-------------------------------------26~28
Block diagram-------------------------------- --------------29
Power Diagram---------------------------------------------30
Power Panel (C.B.A.)-------------------------------------31
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC
EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.
REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES
Published by BCU Monitor
Printed in Taiwan

TABLE OF CONTENTS

Page
SAFETY NOTICE
Copyright reserved
Subject to modification
Description
Video Input Diagram---
Video & SW_DDC Diagram---------------------------- 33
Scaler Diagram------------------------------------------- 34
Frame_Beffer Diagram---------------------------------- 35
LVDS Diagram---------------------------------------------36
MCU Diagram---------------------------------------------37
Scaler Panel (C.B.A.)-------------------------------38~39
Inverter Diagram(AMBIT)-------------------------- 40~41
Inverter Panel(C.B.A.)------------------------------42~43
Control Diagram------------------------------------------44
Control Panel(C.B.A.)-----------------------------------45
Exploded View ------------------------------------------- 46
parts list--------------------------------47
Spare parts list-------------------------------------- 48~50
CA110 Application----------------------------------51~59
Repair Tips------------------------------------------------60
General Product Specification--------------------61~83
Safety Test Requirements------------------------------84
Important Information-----------------------------------85
Jul . 12 2002
DL9B3L/00C
(LG PANEL)
Horizontal frequencies
30 - 82 kHz
--------------------------------- 32
3138 106 10216
GB
Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 101830 and is the answer not in the manual?

Questions and answers

Related Manuals for BELINEA 101830

Summary of Contents for BELINEA 101830

  • Page 1: Table Of Contents

    18" LCD Colour Monitor - Maxdata(101830) Service Service Service DDC/Power saving/Auto Picture Adjustment DL9B3L/00C (LG PANEL) Horizontal frequencies 30 - 82 kHz TABLE OF CONTENTS Description Page Description Page Video Input Diagram--- --------------------------------- 32 Important Safety Notice ---------------------------------- 2 Video & SW_DDC Diagram---------------------------- 33...

  • Page 2: Important Safety Notice

    Important Safety Notice Max 101830 Go to cover page Proper service and repair is important to the safe, reliable FOR PRODUCTS CONTAINING LASER : operation of all Maxdata Company** Equipment. The service Invisible laser radiation when open. procedures recommended by Maxdata and described in this DANGER- AVOID DIRECT EXPOSURE TO BEAM.

  • Page 3: Technical Data

    Technical Data Max 101830 Go to cover page Pin Assignment Technical Specifications D-Sub connector 1.1 LCD Type NR. : LM181E05-C3 (LG-Philips) Outside dimensions : 389(w)317.2(h)27(d) (Typ) mm Pitch ( mm ) : 0.2805 (per one triad) x 0.2805mm Color pixel arrangement...
  • Page 4 Technical Data(Continued) Max 101830 Go to cover page Allowed 85 Hz overscan signal mode specified Input signal mode Factory preset 16 modes (F) Once the signal input of PC is 85Hz, this monitor is able to display at least for 10 minutes . An attention signal appears and shows PRESET VIDEO RESOLUTION “This is 85Hz overscan for 5 seconds, change computer display...

  • Page 5: Connection To Pc,Front Control

    Connection to PC,Front Control Max 101830 Go to cover page Connecting cables to the monitor Switching the monitor on/off The monitor ports are protected by a cover. 3~8 = Buttons for the OSD menu(On-Screen-Display) 2 = Power indicator 1 = Power button The ON/OFF switch (1) is used for switching the monitor on and off.

  • Page 6: Setting Using The Osd Menu

    Settings using the OSD menu Max 101830 Go to cover page With the buttons on the control panel, call up and use the Setting the colour temperature integrated OSD (On-Screen Display) menu. The "warmth" of the screen colours is set using the colour The OSD menu is available in different languages.

  • Page 7: Failure Mode Of Lcd Panel

    Failure Mode of LCD panel Max 101830 Go to cover page Quick reference for failure mode of LCD panel This page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the Mechanical...

  • Page 8: Troubleshooting

    Max 101830 Trouble Shooting Go to cover page Trouble shooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer and/or with another data cable.

  • Page 9: Clock&Phase Adjustments

    CLOCK & PHASE Adjustments Max 101830 Go to cover page Step 3 : Retain Shut Down Window on the screen , follow The monitor has build-in a auto adjustment hotkey on the front panel, the CLOCK and PHASE adjustment instructions for the...

  • Page 10: Osd Lock/Unlock

    OSD Lock/Unlock, Attention signal, Service Mode Max 101830 Go to cover page Front control panel Recover attention signals by pressing button for more than 10 AUTO seconds without video signal input. Step 1: Disconnect signal cable (Monitor & PC are still ON.) Step 2: Press "AUTO"...

  • Page 11: Aging Mode

    AGING Mode Max 101830 Go to cover page Front control panel Method 2: Step 1: - PC off and Monitor off. - Signal cable connect to rear side of Monitor only. AUTO INPUT MENU - Connect Power Cord to rear side of monitor, then insert the plug into a properly grounded electrical outlet.

  • Page 12: Factory Mode

    Factory Mode Max 101830 Go to cover page Access Factory Mode Default values (example) are as below. Default values (example) are as below. MAXDATA 180P V1.88 02-04-17 AUTO INPUT MENU BRI: BRI: CON: CON: 9300K 9300K 6500K 6500K Fig. 1...

  • Page 13: Warning And Notes

    Warning and Notes Max 101830 Go to cover page Warnings Notes 1. Safety regulations require that the unit should be returned 1. The direct voltages and waveforms are average voltages. in its original condition and that components identical to They have been measured using the Service test software the original components are used.

  • Page 14: Ddc Instructions

    DDC Instructions Max 101830 Go to cover page General Note: The alignment box has already build-in a batteries socket for using batteries (9V) as power source. Pull out the socket by DDC Data Re-programming remove four screws at the rear of box. Please do not forget that In case the DDC data memory IC or main EEPROM which storage all remove batteries after programming.
  • Page 15 DDC Instructions (Continued) Max 101830 Go to cover page Configuration and procedure 3. At the submenu, type the letter of your computer's floppy disk drive followed by :EDID301 (for example, A:\EDID301, as shown in Fig. 5). There are 2 chips contained OSD string, serial number..etc on the circuit board, main EEPROM which storage all factory settings,OSD string.
  • Page 16 DDC Instructions (Continued) Max 101830 Go to cover page Step 3: Modify DDC data (verify EDID version, week, year) Re-programming Analog DDC IC Step 1: After initialize alignment box, connecting all cables and Click (new function) icon from the tool bar, bring up box as shown in Fig.
  • Page 17 DDC Instructions (Continued) Max 101830 Go to cover page Click Next , bring up Fig. 17. Click Next , bring up Fig. 20. Fig. 17 Fig. 20 Click Next , bring up Fig. 21. Click Next , bring up Fig. 18.
  • Page 18 DDC Instructions (Continued) Max 101830 Go to cover page Step 5: Access Factory Mode for DDC data writing Step 8: Save DDC data Sometimes, you may need to save DDC data as a text file for using in other IC chip. To save DDC data, follow the steps below:...
  • Page 19 DDC Instructions (Continued) Max 101830 Go to cover page Re-programming Digital DDC IC (User mode) 4. Click icon (Read EDID function) to read DDC EDID data from Step 1: Connecting all cables and alignment box as shown in monitor. The EDID codes will display on screen as shown in Fig. 32.
  • Page 20 DDC Instructions (Continued) Max 101830 Go to cover page Step 6: Write DDC data Click (Write EDID) icon from the tool bar to write DDC data. Click (Read EDID) to re-confirm (check contents) it. The 128bytes DDC data which had been written into DDC IC of Digital Mode.
  • Page 21 DDC Data of Analog Max 101830 Go to cover page ********************************************************************** EDID log file Standard Timing Identification #4 ********************************************************************** Horizontal active pixels : 1024 Aspect Ratio : 4:3 Vendor/Product Identification Refresh Rate : 70 ID Manufacturer Name : MAX ID Product Code : 0726 (HEX.)
  • Page 22 DDC Data of Digital Max 101830 Go to cover page ********************************************************************** Standard Timing Identification #5 EDID log file Horizontal active pixels : 1280 ********************************************************************** Aspect Ratio : 5:4 Refresh Rate : 60 Vendor/Product Identification ID Manufacturer Name : MAX Detailed Timing #1 ID Product Code : 0726 (HEX.)

  • Page 23: Wiring Diagram

    Wiring Diagram Max 101830 Go to cover page Model : DJ9B3L/00Z...

  • Page 24: Electrical Instructions

    Electrical Instructions Max 101830 Go to cover page 0. General 2.2 Input signal mode When carry-out the electrical settings in many cases a video signal Pre-set 32 modes (P) must be applied to the monitor. PRESET VIDEO RESOLUTION 0.1 AC/DC Measurement:...
  • Page 25 Electrical Instructions (Continued) Max 101830 Go to cover page 3. AC, DC Adaptor 5. PIN ASSIGNMENT OF VARIOUS WAFERS 3.1 Setup the AC I/P at 90VAC, and Output DC loading at 5Amp, The DC output voltage is 12.0 ± 1 V DC, Adjusting is no need.

  • Page 26: Repair Flow Chart

    Repair Flow Chart Max 101830 Go to cover page No Display Check Power Board Power board (Bad AC adapter) 12V/3.3V/5V DC Check video signals input Video source interface Check Check fluorescent Inverter panel lamp ~700VAC with load Check inverter Check main panel...
  • Page 27 Repair Flow Chart Max 101830 Go to cover page AC IN Power supply board 3.3V/5V DC 12V DC Inverter panel Main panel ~700Vrms 12V DC Fluorescent LCD panel Lamp No power (power indicator off) Power supply Check board 12V/3.3V/5V DC...
  • Page 28 Repair Flow Chart Max 101830 Go to cover page Bad brightness Check Bad Inverter Inverter panel output panel 700VAC Check fluorescent lamp Check LCD panel Bad image Check Video,fh/fv signals Check components Check main panel cold soldering Check all connectors &...

  • Page 29: Block Diagram

    Block Diagram Max 101830 Go to cover page 01.PC 04.MEM 03.GM 05.LVDS (reserved) MEM_SW MEM_DATA [0..47] MEM_DATA [0..47] X [0..47] : LVDS [EO] [RGB] [0..7] X [0..47] : LVDS [EO] [RGB] [0..7] MEM_ADD [0..11] MEM_ADD [0..11] LVDS_EN LVDS_EN DQM1 DQM1...
  • Page 30 Schematic diagram(Power) Max 101830 Go to cover page...
  • Page 31 Power Board C.B.A.(copper track & smc side view) Max 101830 Go to cover page 1006 A3 7061 A2 2051 B3 3110 B1 1101 A1 7071 A2 2055 B3 3111 B2 1102 B1 7085 A3 2056 B3 3116 B2 1105 A1 7101 B2 2062 A1 3117 B2...
  • Page 32 Max 101830 Power Board C.B.A. Go to cover page...
  • Page 33 Schematic diagram(DC_Powers) Schematic diagram(Video - Input) Max 101830 Go to cover page...
  • Page 34 Schematic diagram(Video &SW - DDC) Max 101830 Go to cover page 6 7205-24 1 7205-11 4.9V 2 V/div AC 3.1V 1 V/div AC 5 uS/div 4.9V 5 mS/div 4.9V 1.8V 7 7205-25 1 7205-13 2.4V 4.9V 4.9V 3.2V 1.8V 1 V/div AC 1 V/div AC 4.9V...
  • Page 35 Schematic diagram(Scaler) Max 101830 Go to cover page...
  • Page 36 Schematic diagram(Frame_Beffer) Max 101830 Go to cover page...
  • Page 37 Schematic diagram(LVDS) Max 101830 Go to cover page 16 3524-6 23 3528-4 30 3531-1 9 3522-1 1 V/div AC 1 V/div AC 1 V/div AC 1 V/div AC 5 uS/div 5 uS/div 5 uS/div 5 mS/div 10 3522-3 17 3525-1...
  • Page 38 Schematic diagram(MCU) Max 101830 Go to cover page 32 7401-8 1 V/div AC 20 uS/div 33 7401-9 1 V/div AC 5 uS/div 1.4V 34 7401-13 1 V/div AC 0.5 mS/div 1.3V 35 7401-19 2.5V 0.8V 1.3V 1 V/div AC 5 mS/div 1.1V...
  • Page 39 Schematic PWB(Copper track side view) Max 101830 Go to cover page GRID BOARD GRID BOARD # REF LABEL SIDE # REF LABEL SIDE # ____ _____ _________ # ____ _____ _________ 2374 A2 3453 B2 1202 A3 2215 A3 2375 A2...
  • Page 40 Schematic PWB(Components side view) Max 101830 Go to cover page GRID BOARD # REF LABEL SIDE # ____ _____ _________ 3276 B1 3456 B3 1302 B2 2414 B3 6215 B1 1402 B2 2423 A1 3279 B1 3457 B3 6216 B1...
  • Page 41 Inverter Diagram(AMBIT) Max 101830 Go to cover page T50I0I026.00 BOM LIST Ambit's P/N Description 1. 1 90.0007.01 CARTON 560*460*216 mm 2. 1 91.0229.03 TRAY-229b T50I026.00 C/47pF/1808 VIN-1 VIN-1 C/225K/1206 3. 1 T50I026D00 INVERTER LCD 18" FOR POGOII LG@ T/20:1400 4. .2 09.0142.01...
  • Page 42 Inverter Diagram(AMBIT) Max 101830 Go to cover page Description Vendor Part name Parts Pcs/Card IC OZ960DS -1.0 +-4% SSOP20 OZ960DS Transistor 2N7002(E) 60V 115mA 7.5OHM MOTO 2N7002(E) Q18 Q19 Q2 Q23 Q26Q27 MMBT3904LT1 SOT23 40V 200mA MOTO MMBT3904 Q10 Q20 Q21 Q24 Q25 Q3 Q4 Q5...
  • Page 43 Inverter Diagram PWB(AMBIT) Max 101830 Go to cover page...
  • Page 44 Inverter Diagram PWB(AMBIT) Max 101830 Go to cover page...
  • Page 45 Schematic diagram(Control) Max 101830 Go to cover page...
  • Page 46 Control PWB (Copper side view) Max 101830 Go to cover page GRID BOARD GRID BOARD # REF LABEL SIDE # REF LABEL SIDE # ____ _____ _________ # ____ _____ _________ 3703 A2 1701 A3 1712 A4 3704 A2 1702 A3...

  • Page 47: Exploded View

    Exploded View Max 101830 Go to cover page...

  • Page 48: Recommended Parts List

    Recommended Parts List Max 101830 Go to cover page Model: DJ9B3L/00Z Code number Description Item 313815753471 FRONT BEZEL ASSY 313815407231 BEZEL 313815407241 POWER KNOB 313815407251 CONTROL KNOB 313815405181 LENS 313815407291 BACK COVER 1090 313815854391 METAL FRAME+7P WIRE ASSY 1091 823827712121...

  • Page 49: Spare Parts List

    Spare Parts List(Continued) Max 101830 Go to cover page 2369 222224119876 CER2 1206 Y5V 10V 10U P8020 R 2246 223858615636 CER2 0603 X7R 50V 10N PM10 R Parts indicated on 2370 223878615649 CER2 0603 X7R 16V 1 N PM10 R...
  • Page 50 Spare Parts List(Continued) Max 101830 Go to cover page 5206 242254943409 IND FXD 1206 EMI 1 MHZ 50R R 2550 223878615649 CER2 0603 X7R 16V 1 N PM10 R 3403 319802131030 RST SM 0603 10K PM5 COL 5207 242254943409 IND FXD 1206 EMI 1 MHZ 50R R...
  • Page 51 Spare Parts List(Continued) Max 101830 Go to cover page 7212 935245720115 IC SM 74HCT1G14GW (PHSE) R 6111 319801010070 DIO SIG BAV21 (COL) A 7301 932216881671 IC SM GM5020 (GEMI) Y 6112 933952580685 DIO SIG SM BAV103 (TEG0) R 3051 213810113103...

  • Page 52: Ca110 Application

    CA110 Application Max 101830 Go to cover page LCD COLOUR ANALYZER - CA110 1. SUMMARY The LCD Colour Analyzer CA-110 was designed to upgrade the white-balanceprocess on production lines for colour LCD televisions and computer colour LCD panels in the colour LCD industry. The CA-110 consists of a main unit and a measuring probe.
  • Page 53 CA110 Application (Continued) Max 101830 Go to cover page...
  • Page 54 CA110 Application (Continued) Max 101830 Go to cover page ZERO CALIBRATION Zero calibration is performed to determine the output of the measuring probe when no light reaches the sensor and to set this as the zero point to which all other measurements are referenced. Zero calibration must be performed after the POWER switch has been set ON brfore taking any measurements.
  • Page 55 CA110 Application (Continued) Max 101830 Go to cover page SETTING MEASUREMENT AREA Measurement areas of 25mm and 50mm can be selected by extending or retracting the lens barrel. The 25mm measurement area can be used for measuring LCDs with 2 - inch or greater diagonals: the 50mm measurement area can be used for measuring LCDs with 4 - inch or greater diagonals.
  • Page 56 CA110 Application (Continued) Max 101830 Go to cover page SETTING MEASUREMENT DISTANCE The measurement distance (the distance from the front of the measuring probe's lens barrel to the display surface of the LCD ) should be set using a ruler according to the procedure below.
  • Page 57 CA110 Application (Continued) Max 101830 Go to cover page After installation of Chroma 2250, CA110 and LCD monitor. Fig. 7 LCD monitor & Chroma 2250 : Chroma MODEL 2250 Chroma MODEL 2250 - Turn on LCD monitor. - Turn on Chroma 2250 as shown in Fig. 7.
  • Page 58 CA110 Application (Continued) Max 101830 Go to cover page Step B: Brightness & Contrast setting (pre-setting) Brightness : at 100% -----> Contrast : at 70% Fig. 12 MAXDATA 180P V1.88 02-04-17 cover (black) cover (black) Probe CA-A30 : Fig. 13 - Remove the cover (black) of CA-A30 as shown in Fig.13.
  • Page 59 CA110 Application (Continued) Max 101830 Go to cover page Fig. 19 Y value>200 is OK Y value>200 is OK <-----------------------> Luminance (Y) : Fig. 20 Above 200 NIT in the center of the screen as shown in Fig. 19. FACTORY : -->...
  • Page 60 CA110 Application (Continued) Max 101830 Go to cover page 6500K : As shown in Fig. 22 & 24. - select 6500K R G B. Value of 6500K R - select value of R or G or B - decrease or increase the value of 6500K R G B.

  • Page 61: Repair Tips

    Repair Tips Max 101830 Go to cover page preferably be equipped with a thermal control (soldering 0. Warning temperature: 225 to 250 C). - The chip, once removed, must never be reused. All ICs and many other semi-conductors are susceptible to electrostatic discharges (ESD).

  • Page 62: General Product Specification

    Max 101830 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page HUDSON-1 18” GENERAL PRODUCT SPECIFICATION . ANALOG AND DIGITAL DUAL INPUT . AUTO PICTURE ADJUSTMENT . 16 FACTORY PRESET MODES AND 32 PRESET MODES WHICH CAN BE RECOVERED TO PRESET MODES .
  • Page 63 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page CONTENTS Foreword Product profile Scanning frequenc ies Video dot rate Power input Power consumption Dimensions Weight Functions Ambient temperature 2.10 Regulatory compliance Electrical characteristics Interface signals Video Interface 3.2.1 D-sub cable 3.2.2...
  • Page 64 Max 101830 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page Mechanical characteristics Controls Unit dimension / weight Tilt and swivel base Transportation packages 5.4.1 Shipping dimension / weight 5.4.2 Block unit / palletization Environmental characteristics Susceptibility of display to external environment...
  • Page 65 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page FOREWORD This specification describes a 18" SXGA multi-scan color TFT LCD monitor with max. resolution up to 1280*1024 /76 Hz non-interlaced. PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in global styling cabinet which has an integrated tilt and swivel base.
  • Page 66 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Electrical characteristics Interface signals The input signals can be applied in three different modes : 1). D-shell Analog Input signal : Video, Hsync., Vsync Video : 0.7 Vp-p, input impedance, 75 ohm @DC Sync.
  • Page 67 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Interface 3.2.1 D-Sub Cable Length : 1.8 M +/- 50 mm (fixed) Connector type : D-sub male with DDC2B pin assignments. Blue connector thumb-operated jack screws pin assignment : PIN No.
  • Page 68 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Ground(return for +5V and H/Vsync) Hot plug detect TMDS data0- TMDS data0+ TMDS data0 shield TMDS clock shield TMDS clock+ TMDS clock- Analog R Analog G Analog B Analog H-sync Analog GND (Analog R, G, B return) 3.2.3 Software control functions via OSD/control...
  • Page 69 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page LANGUAGE : ENGLISH , ESPANOL , FRANCAIS , DEUTSCH , ITALIANO JAPANESE ADJUST POSITION : HORIZONTAL VERTICAL BRIGHTNESS & CONTRAST : brightness and contrast adjustment. VIDEO NOISE : Phase adjustment, Clock adjustment...
  • Page 70 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page (2) Digital interface OSD : Adjustable functions: MAIN CONTROLS LANGUAGE ADJUST POSITION BRIGHTNESS & CONTRAST OSD SETTINGS PRODUCT INFORMATION RESET TO FACTORY SETTINGS INPUT SELECTION EXIT MAIN CONTROLS MOVE SELECTION THEN ok...
  • Page 71 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page 3.3.2 Factory preset timings The factory settings of size and centering are according to the reference timing charts ( see fig-4, fig-5 ) MODE NO. RESOLUTION 640 x 350 720 x 400...
  • Page 72 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page MODE NO. RESOLUTION 800 x 600 800 x 600 800 x 600 832 x 624 Dot clock(MHz) 49.498 56.251 57.28 46.9kHz 37.9kHz 53.7kHz 49.7kHz A ( us ) 21.333 (1056 dots) 26.4 (1056 dots)
  • Page 73 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page MODE NO. RESOLUTION 1024 x 768 1024 x 768 1152 x 8 1152 x 864 Dot clock(MHz) 83.096 94.5 94.5 61.1kHz 68.7kHz 67.5kHz 63.9kHz A ( us ) 16.367 (1360dots) 14.561 (1376 dots) 14.815 (1600 dots)
  • Page 74 Max 101830 GENERAL PRODUCT SPECIFICATION(Continued) Go to cover page MODE NO. RESOLUTION 1280 x 960 1280 x 960 1280 x 1024 1280 x 1024 Dot clock(MHz) 129.895 130.223 60kHz 75kHz 76kHz 64kHz A ( us ) 16.667(1800 dots) 13.307 (1728 dots) 13.158 (1712 dots)
  • Page 75 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page 3.3.3 Horizontal scanning Sync polarity : Positive or Negative Scanning frequency : 30 - 82 K Hz 3.3.4 Vertical scanning Sync polarity : Positive or Negative Scanning frequency : 56 - 76 Hz...
  • Page 76 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Visual characteristics Test conditions Unless otherwise specified, this specification is defined under the following conditions. (1) Input signal : As defined in 3.3, 1280 x 1024 non-interlaced mode (80K/75Hz), signal sources must have 75 ohm output impedance.
  • Page 77 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Note : 1. Screen displays perfect picture at 16 factory preset modes Screen displays visible picture with OSD warning when input modes are other then 32 preset modes Brightness : 200 nits (at panel color temperature, 9 points averaged, Fig. 1 ) Image size 4.4.1...
  • Page 78 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page White color adjustment There are two factory preset white color 9300K, 6500K. Apply full white pattern, with brightness in 100 % position and the contrast control at 70 % position. The 1931 CIE Chromaticity (color triangle) diagram (x,y)
  • Page 79 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Tilt and swivel base tilt angle : -5 to +35 swivel rotation : 175 Transportation packages 5.4.1 Shipping dimension/Weight Carton dimension : 510(W) X 570(H) X 244(D) mm Gross weight : 8.5 KGS 5.4.2...
  • Page 80 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Transportation tests Standard Philips UAN-D1400 NSTA Height 70 cm 61 cm 1 corner 1 corner Drop Sequence 3 faces 3 edge Test 6 face electrical function ok Test mechanical function ok...
  • Page 81 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Quality assurance requirements Acceptance test according to MIL-STD-105D Control II level AQL : 0.65 (major) 2.50 (minor) (please also refer to annual quality agreement) Customer acceptance criteria : UAW0377/00 Serviceability The serviceability of this monitor should fulfill the requirements which are prescribed in UAW-0346 and must be checked with the check list UAT-0361.
  • Page 82 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page Fig 2: Cross talk pattern Gray level 46 (64 Gray level) Fig 3: Cross talk Pattern Center at Gray level 0 (Black) 18"TFT SXGA LCD CMTR-HP 01-11-09 EDWARD CHANG 01-11-09...
  • Page 83 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1 18"TFT SXGA LCD CMTR-HP 01-11-09 EDWARD CHANG 01-11-09...
  • Page 84 GENERAL PRODUCT SPECIFICATION(Continued) Max 101830 Go to cover page VIDEO VERTICAL COMPOSITE SYNC. & VIDEO ( SYNC. ON GREEN ) HORIZONTAL VERTICAL FIG-5 TIMING CHART -2 18"TFT SXGA LCD CMTR-HP 01-11-09 EDWARD CHANG 01-11-09...

  • Page 85: Safety Test Requirements

    Safety Test Requirements Max 101830 Go to cover page 3. Equipments and Connection All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both Hipot and Ground Continuity testing. 3.1. Equipments...

Table of Contents