Operating Mode - Bosch VIP XD Installation And User Manual

EN | 54
maintained. In monostable operation, the time can be selected after which the
relay reverts to its idle state.
You can choose various events that activate the output automatically. Thus, for
example, it is possible to switch on a spotlight in response to a motion alarm and
switch it off again when the alarm is over.
Idle state:
Select Open if the relay is to operate as a normally open contact or Closed if it
is to operate as a normally closed contact.

Operating mode:

Select an operating mode for the relay.
If, for example, a lamp switched on by an alarm is to remain lit when the alarm
has ended, select Bistable. If an acoustic signal activated by an alarm is to
sound for a period of ten seconds for example, select 10 sec.
Relay follows:
For each number, enter the corresponding IP address for the desired remote
location.
Off
No relay triggering by events
Connection
Triggering if any connection is established
Remote input 1
Triggering by a relay contact at a remote location (only when a connection is
established)
Relay name:
The relay can be assigned a name here. The name will be shown on the button
next to Trigger relay.
Trigger relay:
Click the button to switch the relay manually (for example for testing purposes
or to operate a door opener).
Configuration using a Web Browser
Installation and User Guide | VIP XD
Bosch Security Systems | 2005-05 | V1.0