Turbocharger Weight And Transportation - ABB A238-H Series Original Assembly Instructions

Assembly Instructions / A200-H
3 Turbocharger weight and transportation / ​
3 Turbocharger weight and
transportation
Lifting gear with a sufficient load limit must be used for removing, installing and transport-
ing the turbocharger. The weight specified below applies to the heaviest variant possible.
Depending on the specification, the weight specified on the rating plate may be lower than
the standard value specified here.
Swivel lifting eyes to be used
Swivel lifting eyes are required for the safe lifting of loads, which are not supplied by ABB.
Fig. 3: Swivel lifting eye (example)
Product Thread M
A238-H M10
A240-H M12
Table 4: Swivel lifting eyes
Fig. 4: Turbocharger suspension with swivel lifting eye (S)
Product
A238-H
A240-H
Table 5: Weight of the turbocharger
© Copyright 2021 ABB. All rights reserved.
Length L
≤ 18 mm
≤ 21 mm
HZTL455311P0042_EN
Load limit
≥ 450 kg
≥ 700 kg
Weights [kg]
450
700
Rev.A September 2021
Quantity
1
1