Symantec RP-S500 Quick Start Manual

Reporter Quick Start Guide
RP-S500 Appliance
Figure 1: RP-S500 Deployment
1 — Unpack the Appliance
Unpack the shipping package for the appliance and verify it
includes the following:
RP-S500 appliance

(2) AC power cords

(1) Null-modem serial cable

Grounding Hardware

2- and 4-post slide-rail kit

Accessing Appliance Documentation

Software License Agreement

Hardware Warranty Information

Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, the A logo, Symantec, the Symantec logo, the Checkmark logo, Blue Coat, and the Blue Coat
logo are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries, and/or the EU. Copyright © 2021 Broadcom. All Rights Reserved.
The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries. For more information, please visit www.broadcom.com.
2 — Connect Cables
It is recommended that you plug in cables, verify LEDs, and
configure and license the appliance before mounting it in an
equipment rack. Make sure the appliance is on a flat, level
surface when performing the initial configuration. If you would
rather mount the appliance before performing configuration
tasks, skip to Mount the Appliance.
The following procedure describes a typical deployment for
RP-S500 appliances (as shown in
on other deployments, see the Reporter software documenta-
tion, available at: techdocs.broadcom.com
24 Aug 2021
Figure 1). For information