B1002 0C; Line2(Driver Pretensioner)Leakage To Short Circuit - Mahindra SCORPIO Diagnostic Manual

Hide thumbs Also See for SCORPIO:
Table of Contents

Advertisement

Diagnostic Manual
Scorpio mHawk
Error Code
Code(DTC)
Status(STA)
B1002
Airbag warning lamp Status: ON.
Probable Causes:
• +ve and –ve lines short in the wiring.
• Low loop resistance in the wiring.
• Pretensioner internal failure.
Corrective Action:
1. Disconnect the Pretensioner unit and connect the dummy resistor. Check for
the DTC. If DTC goes to healed condition, problem is with the Pretensioner,
and it should be replaced. If it is still present, the problem is with wiring.
Then follow step 2 onwards.
A
C
2. Check the loop resistance with the diagnostic tester. The value should be
between 1.9Ω to 4Ω. If not change the wiring harness.
The repair methods given by the manufacturer in this document are based on the technical specifications
modified as a result of changes introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are
manufactured. The reproduction, translation, transmission, in part of or whole of the present document, are prohibited without the prior written consent of Mahindra &
Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authoirsed Service Centre of Mahindra & Mahindra Ltd., will amount
to unauthorized use and shall be liable for penalty/prosecution © 2010 Mahindra & Mahindra Ltd. 
SRS
-
0C

Line2(Driver Pretensioner)leakage to short circuit

15
00081
MAN-
-
January 2010/Rev 1
DTC
B1002
Label
,
current at the time of release. The methods may be
STA
0C

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCORPIO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF