Mitsubishi Electric 800 Series Manual page 58

Appendix 3
The product certified in compliance with the Eurasian Conformity has the EAC marking.
Note: EAC marking
In 2010, three countries (Russia, Belarus, and Kazakhstan) established a Customs Union for the purposes of revitalizing the economy by forming a large
economic bloc by abolishing or reducing tariffs and unifying regulatory procedures for the handling of articles.
Products to be distributed over these three countries of the Customs Union must comply with the Customs Union Technical Regulations (CU-TR), and the EAC
marking must be affixed to the products.
For information on the country of origin, manufacture year and month, and authorized sales representative (importer) in the CU area of this product, refer to the
following:
• Country of origin indication
Check the rating plate of the product. (Refer to
Example: MADE IN JAPAN
• Manufactured year and month
Check the SERIAL number indicated on the rating plate of the product. (Refer to
Rating plate example
   
Symbol Year Month Control number
SERIAL
The SERIAL consists of one symbol, two characters indicating the production year and month, and six characters
indicating the control number. The last digit of the production year is indicated as the Year, and the Month is indicated
by 1 to 9, X (October), Y (November), or Z (December).
• Authorized sales representative (importer) in the CU area
The authorized sales representative (importer) in the CU area is shown below.
Name: Mitsubishi Electric (Russia) LLC
Address: 52, bld 1 Kosmodamianskaya Nab 115054, Moscow, Russia
Phone: +7 (495) 721-2070
Fax: +7 (495) 721-2071
Appendix 4
The mark of restricted use of hazardous substances in electronic and electrical products is applied to the product as follows based on the "Management Methods
for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products" of the People's Republic of China.
电器电子产品有害物质限制使用标识要求
环境保护使用期限标识
本产品中所含有的有害物质的名称、含量、含有部件如下表所示。
• 产品中所含有害物质的名称及含量
部件名称 
电路板组件 （包括印刷电路板及其构成的零部件，
如电阻、电容、集成电路、连接器等） 、电子部件
金属壳体、金属部件
树脂壳体、树脂部件
螺丝、电线
上表依据 SJ/T11364 的规定编制。
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T26572 规定的限量要求以下。
×：表示该有害物质在该部件的至少一种均质材料中的含量超出 GB/T26572 规定的限量要求。

即使表中记载为 ×，根据产品型号，也可能会有有害物质的含量为限制值以下的情况。

根据产品型号，一部分部件可能不包含在产品中。
Instructions for EAC
page 3.)
Restricted Use of Hazardous Substances in Electronic
and Electrical Products
铅 汞
(Pb) (Hg)
× ○
× ○
○ ○
○ ○
page 3.)
有害物质 
镉 六价铬
(Cd) (Cr(VI))
× ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
多溴联苯 多溴二苯醚
(PBB) (PBDE)
○
○
○
○
Appendix
25