Advertisement
Sensepoint Plus, Sensepoint Pro, Series 3000 XPIS and Sensepoint XCD Duct Mounting Kit
Assembling Detector Components
1
Fit the Detector to the Mounting Plate.
Screw the detector firmly into the plate mounting hole in a clockwise direction.
2
Fit the Sensor Retainer to the Detector.
3
Fit a link pipe (5 mm ID) between the retainer port and the gas inlet port on the underside
of the Mounting Plate.
Screw the retainer firmly onto the detector in a clockwise direction.
Note: Sensor retainer of duct mounting kit for Sensepoint Pro is not compatible with Series 3000 XPIS.
NOTE THAT THE DETECTOR
SHOWN IS SENSEPOINT PRO
SENSEPOINT PLUS,
SERIES 3000 XPIS AND
SENSEPOINT XCD FIT IN
EXACTLY THE SAME WAY
4
Issue 3 07/2009
MAN0639
Advertisement
