Table of Contents
Advertisement
4.8.
Storage
Store the equipment in a cool, dustproof, dry, and dark space
to avoid high temperature, humidity and direct sunlight.
Limitations for the time for sterilized equipment belong to
package.
5. Maintenance and Safety Inspection
1) After using the probe, it should be cleaned and disinfected
or sterilized according to "4. Cleaning, Disinfection and
Sterilization", store the probe in a cool and dark space to
avoid high temperature, humidity and direct sunlight.
2) Visually inspect the surface of the probe head, the housing, the cable
and the connector for any crack, scratch or denaturalization. If you
find any damage, do not use the probe, and contact a service support
immediately.
6. Safety Precautions
Never use the probe if the probe head, housing or cables are cracked
or damaged.
Warning is case of using probe covers which latex is contained to.
The latex may cause such allergic reactions as itching, rubor,
urticaria, swelling, fever, anhelation, wheezing, and depression of
blood pressure, shock and so on. For the patients suspected of latex
allergy, do not use the latex-containing medical devices. If you
observe any of above mentioned symptoms in your patient during the
operation, stop the use of the latex-containing medical devices
immediately and take an appropriate treatment to the patient.
By examination of an early pregnancy the exposure time shall be as
short as possible. Start examination with acoustic output power set
to L (Low).
The probe connector is not water proof. Do not allow liquid to contact
the connector.
Do not drop, hit or bent the probe.
Use only water, detergents and disinfectants in the suppliers list.
Between uses store the probe holder of scanner.
The probe is not delivered disinfected or sterilized.
WARNING
CAUTION
-11-
Q1E-EP0415
Advertisement
Table of Contents
