Subscribe to Our Youtube Channel
Related Manuals for Sigma Controls 100 Series
Summary of Contents for Sigma Controls 100 Series
- Page 1 SERIES 100 FLOAT OPERATED PUMP CONTROLLERS INSTRUCTION MANUAL VISIT OUR WEBSITE SIGMACONTROLS.COM SERIES 100 MANUAL 082112...
- Page 2 TABLE OF CONTENTS INTRODUCTION………………………………………… Ordering Information Specifications Features PROGRAMMING AND INITIAL SETUP………………. Initial Setup & Programming Overview/key Description PROGRAMMING RECORD SHEET…………………… WIRING…………………………………………………… DWG. # 10-63 Digital Input Digital Output WARRANTY………………………………………………...
- Page 3 Introduction The Sigma Controls 100 series pump controllers are micro controller based devices for the operation of 2 or 3 loads (pumps, compressors, etc.), with user programmable alternation and/or sequencing with process alarm(s). Designed for DIN rail mounting these instruments provide either primary or backup control in industrial and water and wastewater applications.
- Page 4 Removable screw terminal blocks 28 – 16 AWG wire CONTROL OUTPUTS: 4 relay outputs, SPDT Form ‘C’ relays 6 AMP 1 Year Warranty MODBUS Network allows multiple units to be connected together for distributed applications, remote monitoring SCADA applications (optional). FEATURES Microprocessor Based 16 LED Indicators...
- Page 5 PC101S / PC102S PROGRAMMING INSTRUCTIONS PROGRAM MODE HOLD “MODE AND SELECT SWITCHES” [ALL LEDS WILL LIGHT] AFTER 5 SECONDS THE LED TEST WILL GO OFF AND THE PROGRAM LED WILL BE ON. ALT MODE THE LEAD LED WILL BE LIT AND “P1 “ OR “P2” LEDS WILL INDICATE WHAT MODE IS ACTIVE.
- Page 7 WARRANTY All Sigma Controls, Inc. products are warranted to be free from defective materials and workmanship for one (1) year from date of shipment. Sigma reserves the right to repair or replace at its option any product found to be defective.
- Page 8 SERIES 100 RETURN AUTHORIZATION FORM *****IMPORTANT RETURN/REPAIR INFORMATION***** SENSORS AND CABLE THAT HAVE BEEN USED IN WASTEWATER OR HAZARDOUS LIQUIDS MUST BE THOROUGHLY CLEANED BEFORE RETURNING. UNITS RETURNED UNCLEAN WILL BE CONSIDERED UNREPAIRABLE AND RETURNED TO THE SENDER OR DISCARDED. NOTE: DO NOT SUBMERGE UNITS FOR CLEANING WITH CABLE CUT OR REMOVED.
Need help?
Do you have a question about the 100 Series and is the answer not in the manual?
Questions and answers