Troubleshooting Guide - Avanti PIM25SS Instruction Manual

You can solve many common ice maker problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
Problem
The compressor works
abnormally with a buzzing
Noise.
Water shortage indicator
Light is on.
Ice full indicator light is on.
Indicator lights are off.
The ice made is too large
and with pieces sticking
together.
Conditions for ice making
cycle are right but no ice is
made.
Both alert and ice full
indicators are on.
PROBLEMS WITH YOUR ICE MAKER?

TROUBLESHOOTING GUIDE

Possible Cause
The voltage is lower than
recommended.
There is not enough water in
the reservoir.
Ice storage cabinet is full to the
top.
Blown fuse/ no power/blown
breaker
The water temperature in the
storage tray or ambient is too
low.
Refrigerant leaks/ sealed
system is blocked.
The water tray does not turn.
Suggested Solutions
Stop the ice maker and do not restart
until the voltage is normal.
Press the stop button, fill with water,
wait 3 minutes and press the start
button to restart.
Remove some of the ice.
Replace fuse / turn power on.
Stop the machine and reset the ice
making cycle. Restart the machine
after turning it off.
Replace unit.
Check for blocked ice cubes.
12