PRE-CONFIGURED? If you received your gateway from your service provider and they have provided you with their own instructions, refer to those to complete the setup. In some cases, the gateway has been pre-configured for you and is ready to use. Otherwise, you will need to complete the setup yourself.
Page 3
This product includes software code that is subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). This code is subject to the copyrights of one or more authors and is distributed without any warranty. A copy of this software can be obtained by contacting NetComm.
1. Turn on the Wi-Fi 6 Gateway. Wait a few minutes for it to start up. 2. Type the network name and password on the Wi-Fi Security Card into your wireless device when connecting or scan the QR code. POWER BUTTON CONNECTING WITH WI-FI...
Page 9
TYPE The username and password are case sensitive. SCAN...
Page 11
CONFIGURING YOUR GATEWAY To complete the setup, you will need the following information from your service provider: - Internet service type (ADSL/VDSL/Ethernet WAN) - Connection type (PPPoE/PPPoA/Dynamic IP/Static IP) - Other specifics depending on your connection type including 802.1P priority, VLAN Tag, WAN IP Address, Subnet Mask and DNS Servers - VoIP settings from your service provider if you intend to use a phone with your service.
Page 16
NetComm Wireless Limited is part of Casa Systems, Inc. Casa Systems, the future of NetComm ANZ HEAD OFFICE SYDNEY Casa Systems Inc. 18-20 Orion Road, Lane Cove NSW 2066, Sydney Australia +61 2 9424 2070 www.netcomm.com CORPORATE HEADQUARTERS ANDOVER Casa Systems Inc.
Need help?
Do you have a question about the NF20 and is the answer not in the manual?
Questions and answers