System Board; Replacing The System Board - Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual

Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the riser module 1, see
Replacing the VROC module
▶ Disconnect the VROC module from the VROC connector on the system
board, see "Removing the VROC module" on page
▶ Connect the VROC module to the VROC connector on the system board,
see "Installing the VROC module" on page
Concluding steps
▶ Install the riser module 1, see
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
16.9

System board

16.9.1

Replacing the system board

Field Replaceable Unit
(FRU)
RX2530 M6
48.
"Removing a riser module" on page
"Installing a riser module" on page
57.
62.
66.
Upgrade and Maintenance Manual
System board and components
49.
52.
384.
382.
66.
Hardware: 40 minutes
Software: 20 minutes
48.
69.
69.
385