Table of Contents
Advertisement
Quick Links
Zen Habitats 4'x2'x4' Assembly Instructions
Parts list:
Part A-1 (4) – 22" Aluminum Frame (2 channels at 90-degree angle)
Part A-2 (5) – 46" Aluminum Frame (2 channels at 90-degree angle)
Part A-3 (2) – 10" Aluminum Frame (2 channels at 90-degree angle)
Part B (2) – 35" Aluminum Side Door Frame (1 channel on one side and 1 double 3/4" door rail at 90-degree angle)
Part C (1) – 46" Middle Door Frame (1 channel on one side and 1 double ¼" door rail on opposite side)
Part D (1) – 46" Aluminum Top Door Frame (1 channel on one side and 1 double 3/4" door rail at 90-degree angle)
Advertisement
Table of Contents
Related Manuals for Zen Habitats 4'x2'x4' PVC Panel Reptile Enclosure
Summary of Contents for Zen Habitats 4'x2'x4' PVC Panel Reptile Enclosure
- Page 1 Zen Habitats 4’x2’x4’ Assembly Instructions Parts list: Part A-1 (4) – 22” Aluminum Frame (2 channels at 90-degree angle) Part A-2 (5) – 46” Aluminum Frame (2 channels at 90-degree angle) Part A-3 (2) – 10” Aluminum Frame (2 channels at 90-degree angle) Part B (2) –...
- Page 2 Part E (1) – H-frame with Zen Habitats logo Part F (8) – Pressure corners (with 3 prongs) Part G (2) – T Shaped Pressure connectors Part H-A (1) – Wire Grommet Part H-B (1) – Solid Plug Part I (1) – 46”x22” Galvanized Steel Screen Top with Support Bars Part J-1 (1) –...
- Page 3 Part L (2) – Acrylic Door (35”x22”) Part M (2) – Doorknob and Screws Part N (1) – Substrate Shield (46”x10”) Part O (1) – Bottom Screen (46”x10”) Part P (1) – Humidity Shield Part Q (2) – Aluminum Door Wraps (optional)
- Page 4 Part R (1) - Glue Part S (1) – Wire Door Lock (optional) Assembly Video instructions also available at https://www.zenhabitats.com/pages/4x2x4-enclosure-assembly Step 1 – Assemble Bottom • Attach the pressure corners (Part F) to each end of a 22” aluminum frame piece (Part A-1). Make sure that the fingers from the corners align with the channels of the frame.
- Page 5 Insert the two side panels (Part J-2) on the left and right-side channels as well as the bottom of the back. • Place the H-frame with the Zen Habitats logo (Part E) on top of the bottom back panel. Slide the top back panel (Part J-1) with the grommet hole at the top.
- Page 6 Step 4 – Assemble Top • Attach the pressure corners (Part F) to each end of two 22” aluminum frames (Part A-1). Make sure that the fingers from the corners align with the channels of the frame. (see the first photo) •...
- Page 7 • Attach the other side frame, with the two pressure corners already connected, to the assembled frame. You should now have a rectangle shaped floor with four fingers facing up. • Flip the screen over and insert the four pressure connectors into the frame of the enclosure. Step 5 –...
- Page 8 Step 9 – Wire Door Lock (optional) • With the doors fully closed, slide the hook side of the wire door lock (Part S) between the doors. • Twist so the hook is facing the back door and pull back to make sure the hook is wrapped around the back door. This will keep your doors from being inadvertently opened.
Need help?
Do you have a question about the 4'x2'x4' PVC Panel Reptile Enclosure and is the answer not in the manual?
Questions and answers