Download Print this page
EUCHIPS PT-112U Installation Manual

EUCHIPS PT-112U Installation Manual

Triac wall mount touch panel dimmer

Advertisement

Quick Links

PT-112U
Function Description
Touch this slider by your finger to adjust the brightness.
Turn on/off this controller at any state; when the dimmer is turned on, long press
the key for 3 seconds, you can turn on/off buzzer.
Brightness reduce key. Brightness reduces 1 with each short press. With long press,
it could reduce brightness quickly until the darkest.
Brightness increase key. Brightness increase 1 with each short press. With long
press, it could increase brightness quickly until the brightest.
Technical Parameters
Supply voltage
Dimming mode
Output Voltage
Output current
Output Power
Static power
Output channel
External dimension
Packing size
Working temperature
Net weight
Gross weight
Dimension(mm)
74mm
42mm
4mm
8mm
Wiring Diagram
※The contents of this manual are updated without prior notice. If the function of the product you are using is inconsistent with the instructions, the function of the product shall prevail.Please contact us if you have any questions.
User's manual: 2019-9
90-240VAC
Trailing-edge dimming
90-240VAC
<1A
<110W(110VAC), <220W(220VAC)
<3W
1 channels
L120XW74XH43mm
L145XW99XH53mm
-20-60℃
181g
240g
13mm
Triac Dimming
Panel
LED Driver
Light
AC 90-240V
Interface Definition
L
N
L
INPUT
OUTPUT
INPUT: Two terminals, L and N, Current 1A
OUTPUT: Two terminals, L and N, Current 1A
Installation Guide
1. Connect wire according to typical
application. Refer to typical application
2. Gently pry gaps in touch panel with a screwdriver, and then you can slowly remove the
panel, as shown below:
3. Mount the controller on the cassette in the wall after connecting the wire, and then nail
the screw, fix it on the wall, finally you can install the switch pedestal on the wall.
43mm
4. Buckle the glass panel to the bottom
box in the right direction
Remarks:
1. Connect the load wire at first, then connect the power wire; Please ensure short circuit
can not occur between connecting wire before you turn on the power.
2. Power supply voltage range is 90-240VAC, more than voltage range maybe will burnout
the controller.
N
1/1
Triac Wall Mount Touch Panel Dimmer
www.euchips.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the PT-112U and is the answer not in the manual?

Questions and answers

Summary of Contents for EUCHIPS PT-112U

  • Page 1 Triac Wall Mount Touch Panel Dimmer PT-112U Function Description Touch this slider by your finger to adjust the brightness. Turn on/off this controller at any state; when the dimmer is turned on, long press the key for 3 seconds, you can turn on/off buzzer.
  • Page 2 Triac壁挂式触控调光器 PT-112U 功能描述 滑动条: 使用手指滑动进行调光控制, 从上往下亮度降低, 最上面为 100%亮 度, 最暗为5%亮度。 开关键: 单击可开/关面板。开启后灯具恢复到上次关闭时的亮度。 亮度加/减键: 点击按键可进行亮度加减. 可设置 16个等级的亮度, 最 低亮度为 5%, 100%.长按加/减键将快速增加或减小. 按键音:默认为按键音打开.在打开状态下,长按开关键3秒,则可关闭按键音. 技术参数 安装指南 输入电压 90-240VAC 1. 根据特定的应用场合接线。 调光方式 后沿切相调光方式 输出通道 1通道 输出电压 90-240VAC 输出电流 <1A 输出功率 <110W(110VAC), <220W(220VAC) 2. 用螺丝刀轻轻撬开触控板上的缝隙, 然后你就可以慢慢地把它取出来面板,...