Sealey SSC450 Instructions Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear
instruction safety
manual footwear
1. CONTENTS
Section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Section 2.1 Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Section 2.2. Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Section 3. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Section 4. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Section 5. Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . 3
Section 6. Maintenance/Inspection/Examination . . . . . . . . . . . . 4
Section 7. Owner's & Operator's Responsibilities. . . . . . . . . . . . 4
Section 8. Declaration of Conformity . . . . . . . . . . . . . . . . . . . 5&6
Section 9. Parts List and Diagram . . . . . . . . . . . . . . . . . . . . . 7&8
2. GENERAL
2.1. Identification
Supplier: Sealey Power Products,
Kempson Way,
Suffolk Business Park,
Bury St Edmunds,
Suffolk, IP32 7AR.
Model No: SSC450,SSC900
2.2. Technical Data
Model no: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SSC450
Lifting Capacity in Position 1:. . . . . . . . . . . . . . . . 450kg
Lifting Capacity in Position 2:. . . . . . . . . . . . . . . . 125kg
Weight:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45kg
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SSC900
Lifting Capacity in Position 1:. . . . . . . . . . . . . . . . 900kg
Lifting Capacity in Position 2:. . . . . . . . . . . . . . . . 250kg
Weight:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50kg
Manufactured from heavy-duty steel with a powder coated finish for added corrosion resistance. These cranes feature a unique 360° swivel
base for easy manoeuvrability of the load. Threaded locking arm allows the crane to be locked in place when not in use. Mounts easily onto
any strong and stable surface including loading bays, 4x4s and flatbed trucks/vans. Robust lifting ram enables a maximum capacity of 450kg
or 900kg when the lifting boom is retracted and 125kg or 250kg when fully extended. Includes heavy-duty chain and hook.
Hook features safety clip to help prevent load sling from slipping.
3. SAFETY
3.1. SAFETY
Keep crane, lifting slings, support and beams in good working order and condition. Follow the inspection requirements as
3
described in Section 6, Maintenance. Take immediate action to repair or replace damaged parts by contacting your supplier.
Ensure that all accessory lifting devices are suitable. If crane is damaged, remove from service immediately.
3
Ensure that the crane is securely fixed to the surface or vehicle on which it is to be mounted.
3
Keep children and unauthorised persons away from the working area.
Keep working area clean and tidy, free from unrelated materials and ensure that there is adequate lighting.
3
3
Ensure that load does not exceed the maximum lifting capacity of the crane. Overloading the crane is dangerous. Where
appropriate, use only the lifting points recommended by the manufacturer of the item to be lifted, e.g. vehicle engine.
3
Before lifting the load ensure that the crane boom is in the lowest practical position, that there are no obstacles which may snag
the load whilst it is being lifted and that the area above the boom is clear.
3
To avoid injury, be fully aware of your own and other persons locations in relation to the lifting, and lowering, of the load.
© Jack Sealey Limited
INSTRUCTIONS FOR
STATIC MOUNTED CRANES
450KG & 900KG
MODEL Nos
Wear
protective
gloves
Page No.
Original Language Version
:
SSC450 & SSC900
:
page 1
Crane
Illustrated:
SSC900
SSC450,SSC900 Issue 2 - 18/12/14