Table of Contents
Advertisement
tint
This item is displayed in picture menu when
the TV receives an NTSC signal. By press-
ing “ ” / “ ” button, select tint. Press “ ”
button to increase tint. Press “ ” button to
decrease tint. Tint level can be adjusted be-
tween 0 and 100.
SLFWXUH
ULJKWQHVV
FRQWUDVW
ILOWHU
VKDUSQHVV
FRORXU
WLQW
‚Ãs‚…Ãvp‡ˆ…rÆr‡‡vt†
When the TV is in AV mode; picture menu
items (brightness, contrast, sharpness and
colour) may require re-adjustment.
When PC is Connected To TV:
SLFWXUH
ULJKWQHVV
FRQWUDVW
ILOWHU
SKDVH
IUHTXHQF\
‚Ãs‚…Ãvp‡ˆ…rÆr‡‡vt†
brightness, contrast and filter are identical
to TV mode.
phase
Phase function is used to adjust the focus of
the display and allows you to clear or
sharpen the image of the characters.
By pressing “ ” / “ ” button, select phase.
Press “ ” button to increase phase. Press
“ ” button to decrease phase. Phase level
can be adjusted between 0 and 100.
frequency
Frequency changes the horizontal width of
picture to fix the picture on the screen.
All manuals and user guides at all-guides.com
VKDUS
VKDUS
- 12 -
By pressing “ ” / “ ” button, select fre-
quency. Press “ ” button to increase fre-
quency. Press “ ” button to decrease fre-
quency. Frequency level can be adjusted be-
tween 0 and 100.
audio menu
By pressing “ ” / “ ” button, select the sec-
ond icon. Audio menu appears on the
screen.
hˆqv‚
‚ yˆ€r
ihyhpr
6WG
r‘ ‡rqrqÃhˆqv‚Ãsrh‡ˆ…r †
‚Ãs‚…Ãhˆ v‚Ær‡‡vt†
volume
By pressing “ ” / “ ” button, select volume.
Press “ ” button to increase volume level.
Press “ ” button to decrease volume level.
Volume level can be adjusted between 0
and 50.
balance
By pressing “ ” / “ ” button, select balance.
Press “ ” button to increase balance to the
right. Press “ ” button to decrease balance
to the left. Balance level can be adjusted be-
tween 0 and 100.
AVL
Automatic Volume Level or AVL normalises
the audio output level. This is required to
compensate variations in sound level during
a transmission (e.g. Commercials are nor-
mally louder than the rest of the transmis-
sion).
Press “ ” / “ ” button to select AVL. By
pressing “ ” / “ ” button, set AVL on to acti-
vate it or off to deactivate it.
!
$
‚ss
‚
Advertisement
Table of Contents
