TELETRAC NAVMAN ELD Installation Manual page 10

Installation Verification – Live Test (RIMU)
Power the system up and follow the standard RIMU installation
verification process to test Qube and Messaging functionality.
An installer login is available as: 6789
After completing RIMU verification the installer should also check the ELD
Indicator ( when functioning properly the Icon should be green ) by selecting
the Icon and looking at the line items checking for any warnings, malfunction
messages for the following :
o Data recording compliance
o Data transfer compliance
o Engine synchronization compliance
o Positioning compliance
o Power compliance
o Timing compliance
o Data transfer data
o Engine synchronization data
o Missing required data elements data
o Power data
o Unidentified records data
Upon inspection of the Diagnostics screen each line item should read " OK "
in green text under the < State > column as shown below when functioning
properly. If warning should read " warning " in yellow text ; If malfunction
should read " malfunction " in red text.
Any failures must be called into the Verification department for live
troubleshooting.
10 PRESENTATION NOTE, IF NECESSARY