Hotel Mode Function - Orion TV29LB929 Service Manual

HOTEL MODE FUNCTION

To set the Hotel mode, please follow the steps below.
1. Press the MENU ---> 1147 button on the remote control.
2. Press the DOWN button on the remote control,
3. Select the "Setup" menu , then press ENTER button.
4. Select the "Hotel Mode" menu, Select "On".
5. The Hotel mode setting menu will appear.
6. Using the UP/DOWN button on the remote control,
select the desired mode. Then press the ENTER button.
7. Using the LEFT/RIGHT button on the remote control,
set the mode to desired setting.
8. The Hotel mode has now been set up.
To reset the Hotel mode, please follow the steps below.
1. Press the MENU ---> 1147 button on the remote control.
2. Press the DOWN button on the remote control,
3. Select the "Setup" menu , then press ENTER button.
4. Select the "Hotel Mode" menu, Select "On".
5. The Hotel mode setting menu will appear.
6. Press the DOWN button on the remote control,
7. Select the Clear Lock menu, then press ENTER button.
7 Select the "Clear Lock" menu then press ENTER button
8. The setting items has now been returned to initial value.
Setting item
ANTENNA/CABLE/
SATELLITE/AV
Source Lock
COMPONENT/
HDMI/USB
Tunning Lock
OFF/ANTENNA/CABLE/
SATELLITE/AV
Default Source
COMPONENT/
HDMI/USB
ALL/DIGITAL/RADIO/
Channel Type
ANALOGUE
Default Program
Max volume
Default Volume
Clone to USB
Restore from USB
Clear Lock
Setting value Initial value
OFF/ON
NONE/1/2/3/.../197
0~100
0~100
Hotel mode
Source Lock
Tuning Lock
Default Source
Channel Type
Default Program
Max Volume
Default Volume
Clone to USB
Restore from USB
Clear Lock
Setting Input skip, combine with "Default Source".
Setting of the tunning Lock. When turn on "Tuning lock",
User cannot choose the following item in MENU.
OFF
(skip an item and not available.）
Tuner Mode, Channels, Satellite Setup, First time installation,
Reset Default, Clean All
Setting Input Source, combine with "Source Lock"
OFF
If select "Source Lock" for this function disappear.
Setting of the CH if select "Default Source" to ALL/
ALL
ANTENNA/CABLE/SATELLITE input.
Setting of the CH if select "Default Source" to ANTENNA/
NONE
CABLE/SATELLITE input.
100
Setting of the maximum volume value.
50 Setting volume at Power on.
Copy to USB about User Menu setting, Hotel Mode setting
and stored channels.
Read and Restore data from USB that is saved by Cone
to USB.
Setting of the Hotel Mode return factory setting.
A1-3
On
Off
Off
All
None
FUNCTION
<>
>>
<>
<>
<>
<>
100
50
>>
>>
>>