Grundig 40VLE630BH Service Manual
  1. Manuals
  2. Brands
  3. Grundig Manuals
  4. TV
  5. 40VLE630BH
  6. Service manual

Grundig 40VLE630BH Service Manual

Tp chassis / television
Hide thumbs
Table of Contents

Advertisement

Quick Links

TP CHASSIS / TELEVISION
TP CHASSIS / TELEVISION
SERVICE
MANUAL_V2
1
September 2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 40VLE630BH and is the answer not in the manual?

Questions and answers

Related Manuals for Grundig 40VLE630BH

Summary of Contents for Grundig 40VLE630BH

  • Page 1 TP CHASSIS / TELEVISION TP CHASSIS / TELEVISION SERVICE MANUAL_V2 September 2011...

  • Page 2: Table Of Contents

    4.3. Remote Control ....................18 4.3.1. Arçelik/BEKO Remote Control (YB1/YB9 (3D)) ........18 4.3.2. GRUNDIG Remote Control (TP3) ............19 4.3.3. GRUNDIG 3D Remote Control (TP7) ............20 4.3.4. GRUNDIG 3D Remote Control (TP8/TP9) ..........21 5. USING NEW PRODUCT FEATURES ..............22 5.1.
  • Page 3 TP CHASSIS / TELEVISION 5.2.2. 3D Picture Settings .................. 26 5.2.3. Adjusting 2D>3D Effects................26 5.2.4. Left-Right Correction ................26 5.2.5. Formats supported with HDMI 1.4 ............26 5.3.Inter@ctive TV and Home Network ..............27 5.3.1.Wired Network Connection ............... 27 5.3.2.
  • Page 4 TP CHASSIS / TELEVISION 11.2. Sound but no picture, and backlight not illuminated ........85 11.3. No Sound ..................... 85 12. FAILURE FLOW/TROUBLESHOOTING DIAGRAMS ........87 12.1. Sound but no picture, and backlight illuminated ........... 87 12.2. Sound but no picture, and backlight not illuminated ........88 12.3.

  • Page 5: Revision List

    TP CHASSIS / TELEVISION 1. REVISION LIST Revision List Item Version Revision Date Responsible SEK first draft issued 12.09.2011 TV Design Application Notes for satellite are added 02.11.2011 TV Design Application Oscilloscope waveforms added 02.11.2011 TV Design Application Instruction for software installation updated 14.11.2011 TV Design Application...

  • Page 6: Safety Warnings

    TP CHASSIS / TELEVISION 2. SAFETY WARNINGS Panels used in LCD and LED panel televisions are quite sensitive in electrical and physical aspects. Therefore, the following warnings should be observed. 1. Panel surface is quite sensitive and can be damaged easily. Take care to avoid scratches on the panel surface.

  • Page 7: Product Specifications

    TP CHASSIS / TELEVISION 3. PRODUCT SPECIFICATIONS 3.1. Technical Specifications Screen size 32”/40”/46”/55” LED TV Full HD 100Hz 32”/40”/46” Full HD 200Hz 40”/46”/55” (3D) 3D / 3D Ready 40”/46”/55” Sound output 2X10W @ 8 ohm Onboard Subwoofer 1X10W @ 16 ohm (Optional) Standby power consumption 0.5W Rosh Limits...

  • Page 8: Functional Features

    TP CHASSIS / TELEVISION Cable : Full band 110MHz 862MHz Modulation:16QAM, 32QAM,64QAM, 128QAM and 256QAM Symbol rate: 4.0Msym/s to 7.0Msym/s Terrestrial : VHF/UHF Band width 7 MHz and 8 MHz Reception range COFDM modes: 2k and 8k Set: 16QAM, 64QAM, QPSK 8k Set: 16QAM, 64QAM, QPSK Analog: C02 ...

  • Page 9: Special Features

    TP CHASSIS / TELEVISION • 2 USB (One has HDD support) • Full HDMI CEC support • HDMI 1.4 support • DLNA support • Wired / Wireless connection support • Effective communication with content providers and applications addressing target audience (Facebook, Twitter, Picassa, Youtube, vTuner, eBay, Flickr, Skype, IBB Traffic…optional) •...

  • Page 10: Inter@Ctive Tv

    TP CHASSIS / TELEVISION 3.3.1. Inter@ctive TV Inter@ctive TV applications provide your television with internet services and pages. These applications are designed according to your television. Through Interactive TV feature you can run many local and global internet applications. These applications include video, picture and music applications, social networks, news and sports, weather applications and doctor or pharmacy search, recipes and...

  • Page 11: Hbb Tv (Hybrid Broadcast Broadband Tv)

    TP CHASSIS / TELEVISION image files through devices such as PC, mobile phone or NAS (Network Attached Storage) that function as DMS (Digital Media Server) compatible with DLNA. 3.3.4. HBB TV (Hybrid Broadcast Broadband TV) Hbb TV (Hybrid Broadcast Broadband TV) includes hybrid, integrated broadcasting and internet TV.

  • Page 12: Modular Structure

    TP CHASSIS / TELEVISION Operating much more productively than currently used DVB-T technology, DVB-T2 offers the most appropriate environment for HD broadcasts by using MPEG4 compression technique. Started to be used in the UK, DVB-T2 technology will also be put into practice by Finland and Serbia soon. Besides, DVB-T2 is expected to be deployed in many European countries, primarily Italy and Spain.
  • Page 13 TP CHASSIS / TELEVISION card must be inserted in the CA module to enable the scrambled channels you want to view. September 2011...

  • Page 14: Product Installation

    TP CHASSIS / TELEVISION 4. PRODUCT INSTALLATION 4.1. Product Installation 1 For digital satellite stations (DVB-S), plug the cable of satellite dish into »SATELLITE« socket on the television set; and / or 2a For terrestrial digital stations (DVB-T), plug the cable of the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) into »ANT IN«...
  • Page 15 TP CHASSIS / TELEVISION 3 Plug the power cable into the wall socket. Use only AC power cable supplied with the product. Connect the product to only mains lines between 220-240 V ~ 50-60 Hz voltage/supply range. SCART, HDMI, VGA and RCA cables do not come with the device. It is important to observe the following precautions during installation.

  • Page 16: Input/Output Connections

    TP CHASSIS / TELEVISION 4.2. Input/Output Connections AC IN Power cable input. AV1 / S-VHS Euro/AV socket (CVBS signal, RGB signal); video and audio signal input for S-Video camera (with Scart-SVHS converter). COMPONENT Y Pb Pr Video signal input (YUV signal). L R Audio signal input (YUV signal).
  • Page 17 TP CHASSIS / TELEVISION HDMI3 HDMI socket, audio/video signal input (HDMI). HDMI4 HDMI socket, audio/video signal input (HDMI). USB2 (HDD) USB hard disk socket for external data media and PVR function. LAN Network cable connection socket. U Headphone connection (3.5 mm jack). AV2 Video signal input for camcorder.

  • Page 18: Remote Control

    TP CHASSIS / TELEVISION 4.3. Remote Control 4.3.1. Arçelik/BEKO Remote Control (YB1/YB9 (3D)) - Temporary sound mute button - Temporary on/off button - Numeric buttons - Favorite channels list selection button EPG / ? A-B - EPG menu button (D) - Teletext question / answer button - Audio language selection button (D) - Teletext update button...

  • Page 19: Grundig Remote Control (Tp3)

    TP CHASSIS / TELEVISION 4.3.2. GRUNDIG Remote Control (TP3) September 2011...

  • Page 20: Grundig 3D Remote Control (Tp7)

    TP CHASSIS / TELEVISION 4.3.3. GRUNDIG 3D Remote Control (TP7) September 2011...

  • Page 21: Grundig 3D Remote Control (Tp8/Tp9)

    TP CHASSIS / TELEVISION 4.3.4. GRUNDIG 3D Remote Control (TP8/TP9) September 2011...

  • Page 22: Using New Product Features

    TP CHASSIS / TELEVISION 5. USING NEW PRODUCT FEATURES 5.1. Digital Satellite Settings and Setup (DVB-S2) There are two ways of setting the digital satellite channels: The first simple setup and the other is advanced setup. 5.1.1. Easy Installation All antenna settings are preconfigured for Turksat 42° East satellite stations. 1.In Source Setup menu, Connection Type tab, select Satellite with 2.Use to select Easy Installation and press OK.

  • Page 23: Digital Satellite Channel Settings

    TP CHASSIS / TELEVISION receiving maximum four satellites while DISEqC 1.1 allows for receiving maximum 16 satellites at the same time. 7. Select LNB Selection tab with . Select the satellite that corresponds to the relevant position with 8. Press ● (Red) for Auto Tuning. AUTO CHANNEL SEARCH menu will be displayed. 9.

  • Page 24: Lnb Settings

    TP CHASSIS / TELEVISION 6.To search the list, select the desired satellite with and press OK. 7. Select Scan Mode with . Press to select whether you want to search for only free digital television channels (Free), only scrambled digital television channels (Scramble) or both (Free + Scramble).

  • Page 25: Function

    TP CHASSIS / TELEVISION 3. Select ANTENNA SETTINGS with and press OK. Menu will be displayed. 4.Select the required tabs with . Satellite : Select the desired satellite from the list with and press OK . Transponder: You can select a transponder from the list, change or delete the current transponder or add a new transponder LNB Power: Set LNB power to Off or, depending on LNB type, to 13/18V or 14/19V with .

  • Page 26: Picture Settings

    TP CHASSIS / TELEVISION that supports HDMI 1.4. Side by Side and Top Bottom options do not appear. Turn of the function by setting it to »Off« with »3D« button. 5.2.2. 3D Picture Settings 1 Open the menu with »i« button. 2 Select »PICTURE SETTINGS«...

  • Page 27: Inter@Ctive Tv And Home Network

    TP CHASSIS / TELEVISION 5.3.Inter@ctive TV and Home Network Inter@ctive TV provides your television with internet applications when connected to internet. Through Interactive TV feature you can run many local and global internet applications. These applications include video, picture and music applications, social networks, news and sports, weather applications and doctor or pharmacy search, recipes and viewing traffic congestions depending on your local city.

  • Page 28: Manual Connection

    TP CHASSIS / TELEVISION »V« or »Λ« and confirm with »●« – »NETWORK APPS« menu will be displayed. 3 Select »Connection« option with »V« or »Λ« and select »Wired« with »<« or »>«. 4 Select »Connection Type« option with »V« or »Λ« and select »Auto« with »<« or »>«.

  • Page 29: Wireless Network Connection

    TP CHASSIS / TELEVISION 10 Press » « (green) button to make sure that the network connection is established with the current settings. – »Testing ... Please wait« message will be displayed and if it is connected successfully, »Connection to Gateway : Success«, »Internet Connection: Success« message will be displayed.

  • Page 30: Manual Wireless Network Connection

    TP CHASSIS / TELEVISION 6 Select the network that you want to connect with »V«, »Λ«, »<« or »>« and confirm with »●«. - Wireless connection password screen is displayed. 7 Select the character with »V«, »Λ«, »<« or »>« and move to the next character with »●«.

  • Page 31: Inter@Ctive Tv Internet Applications

    TP CHASSIS / TELEVISION - Wireless connection password screen is displayed. 6 Select the character with »V«, »Λ«, »<« or »>« and move to the next character with »●«. – Select »ABC« for uppercase or »abc« for lowercase and confirm with »●«. –...

  • Page 32: Selecting Internet Applications

    TP CHASSIS / TELEVISION 7- Dlna 8- vTuner 9- goal724 10- apotheken 11- arzte 12- bon gusto 13- laufen 14- yogamour 15- bild 16- maçkolik Applications to be added later (this list may be updated) Twitter NTV News NTV Sport Yemek sepeti Viewster(no DRM)

  • Page 33: Inter@Ctive Browser Main Menu

    TP CHASSIS / TELEVISION 5.4.2. Inter@ctive browser main menu 1 Application gallery. 2 Applications. 3 Description of application. 4 Current TV channel. 5.5. DLNA Home Network Connection With DLNA menu of your television, you can easily access Video, music and photo files on server;...

  • Page 34: Selecting Digital Media Server

    TP CHASSIS / TELEVISION 5.5.1. Selecting Digital Media Server 1 Open the menu with »i« button. 2 Select »NETWORK APPS« menu with »V« or »Λ« and confirm with »●«. Menu will be displayed. Select »Inter@ctive Applications« with »V« or »Λ« confirm with »●«.

  • Page 35: Usb Functions

    TP CHASSIS / TELEVISION confirm with »●« Menu will be displayed. 3 Select »Inter@ctive Applications« with »V« or »Λ« confirm with »●«. »Inter@ctive Applications« menu will be displayed. 4 Select »vTunerA« option with »V«, »Λ«, »<« or »>« and confirm with »●«. –...

  • Page 36: Time Shift - Pause Programme

    TP CHASSIS / TELEVISION Notes: »USB1« interface of the television supports 500mA current according to the USB standard. Devices such as external hard disk and etc. that consume more power can only be connected to the »USB2« interface of the television. If you are using a power cable for the external hard disk that you have connected to the »USB2 (HDD)«...

  • Page 37: Connecting External Data Storage Devices

    TP CHASSIS / TELEVISION 5.7.4. Connecting External Data Storage Devices Before connecting the data medium, switch the television to stand-by with »8«. Connect the device and then switch the television on again. Before disconnecting the data medium, the television must first be switched to standby, otherwise files can be damaged.
  • Page 38 TP CHASSIS / TELEVISION When you switch on your external device (e.g. DVD player), your television will switch to the HDMI source that the external device is connected to. (your television must be on). Selecting menu language When you select menu language on your TV, menu language of the external device will change as well.

  • Page 39: External Device Connection

    TP CHASSIS / TELEVISION 6. EXTERNAL DEVICE CONNECTION Connecting external equipment via SCART socket SATELLITE RECEIVER GAME CONSOLE Connecting external equipment via AV sockets SATELLITE RECEIVER GAME CONSOLE Connecting external equipment via S-Video socket Side view of product SATELLITE RECEIVER GAME CONSOLE September 2011...
  • Page 40 TP CHASSIS / TELEVISION Connecting external equipment via YPBPR sockets Rear view of product Audio connection Video connection Connecting external equipment via HDMI socket SATELLITE RECEIVER GAME CONSOLE Rear and side view of product Connecting digital amplifier / AV receiver via Optical Out or SPDIF socket Optical Connection DIGITAL AMPLIFIER...
  • Page 41 TP CHASSIS / TELEVISION Connecting AV receiver via Audio Out L/R Audio Connection AV RECEIVER Rear view of product PC connection Rear view of product Audio Connection Video connection Inserting CI (Common Interface) card September 2011...

  • Page 42: General Operating Principle Of Tv

    TP CHASSIS / TELEVISION 7. GENERAL OPERATING PRINCIPLE OF TV September 2011...

  • Page 43: Chassis General Operating Principle

    TP CHASSIS / TELEVISION 7.1. Chassis General Operating Principle In TP-chassis products - differing from TF, SX and TX chassis; 100Hz URSA and digital satellite receiver (DVB-S/S2) circuits are not used as a separate module but they are integrated on the chassis to obtain a single unit. Besides, AWOX internet module - used in TX chassis –...

  • Page 44: Dc Power Stage

    TP CHASSIS / TELEVISION the sound is sent to the sound amplifier after being processed. DDR3 RAMs are used for main IC and MEMC circuit's processes. While performing these processes, the main integrated circuit reads software installed on flash and EEPROM data installed on EEPROMs. RAMs are used for the processes performed within the integrated circuit.
  • Page 45 TP CHASSIS / TELEVISION On S605 connector, 3 main control signals are sent to the power supply. The first signal is “POWER_SW”; it is sent to the power source from 8th pin of S605 connector. It switches on 12V and 24V voltages in the "ON" status. The second signal is “BL_CTRL”;...

  • Page 46: Operating Principles Of Circuit Components

    TP CHASSIS / TELEVISION 8. OPERATING PRINCIPLES OF CIRCUIT COMPONENTS 8.1. Circuit components on the chassis IC100, IC-SMD MSD3819TX-UQY LFBGA TRAY Main IC: Main integrated circuit IC100's specifications: Digital (DVB-T/C) and analog broadcasting demodulator, USB recording, Broadcast and A/V d(NTSC/PAL/SECAM) Full HD 100Hz support, MPEG-2 and MPEG-4 support, 32-Bit Linux based processor, Sound and subwoofer processor and interface, 2 USB, 4 HDMI, 2 DDR3 RAM.
  • Page 47 TP CHASSIS / TELEVISION sources' not functioning or losing the picture completely. Besides, the problem might be originated in software, EEPROM, flash, crystal or RAM. If there is a problem, we cannot be sure that it is originated in IC before checking it out. While turning the TV on, main IC switches on the system by reading the flash and turns on the power supply by switching the “POWER_SW”...
  • Page 48 TP CHASSIS / TELEVISION IC104 (OPS), AT24C32D, EEPROM (PANEL DATA) It is an optional panel EEPROM. IC108, IC-SMD W25Q16BVSSIG SOIC8 T&R, SPI FLASH September 2011...
  • Page 49 TP CHASSIS / TELEVISION Similar to TF, TX, SX and SU chassis, TP-chassis product have two types of software. Similar to BIOS software on the computer, "Bootloader code" starts to operate as soon as TV is energized and ensures the functioning of system software. Bootloader code software is stored in SPI flash, which is used on IC108 position.
  • Page 50 TP CHASSIS / TELEVISION RAM is the place where main integrated circuit performs the processes such as decoding, encoding, image and video resolution in all applications. Similar to a calculator, it constantly carries out the processes to ensure the operation of TV. RAM supplies should be carefully checked.
  • Page 51 TP CHASSIS / TELEVISION IC101, IC-SMD TC58NVG1S3ETA00B3Q TSOP48 T&R, NAND Flash IC102(Ops), IC-SMD TC58NVG0S3EBAI4LR0 TFBGA63 T&R, NAND Flash Flash memory is where the system operating software is installed. It can be inserted into IC101 and IC102 positions on the circuit. However, only 1GBit flash on IC101 position is being used in TP chassis.
  • Page 52 TP CHASSIS / TELEVISION If any problem occurs in the flash integrated circuit, the chassis will not function because the software in the chassis does not start. As soon as the chassis is energized, LED located on the front panel will start flashing. This means that main IC has read and started the software.
  • Page 53 TP CHASSIS / TELEVISION IC503, IC-SMD STA339BWTR POWERSSO-36 T&R, Subwoofer Amplifier: TP-chassis products optionally have subwoofer feature. IC503 ensures that audio signal sent by main IC is switched, amplified and transferred to subwoofer. Subwoofer audio output power is 10W. IC304, IC-SMD MSB1231-LF LQFP64 DATE-1051 TRAY, DVBT2 Demodulator: September 2011...
  • Page 54 TP CHASSIS / TELEVISION DVBT2 demodulator enables the reception and modulation of next generation digital terrestrial broadcasting (DVBT2), and the creation of audio and video. For DVBT2 modulated broadcasts to be received by TP-chassis product, DVBT2 should be selected ON in service menu in addition to lineup of DVBT2 modulator and peripheral components on the chassis.
  • Page 55 TP CHASSIS / TELEVISION IC305 is digital demodulator (decoder) integrated circuit. Digital broadcast (D_IF) selected from DVB-S2 tuner enters demodulator IC. Demodulator integrated circuit receives video and audio data loaded on the carrier frequency and this data is separated from the carrier frequency and converted to the form required for transmission to the main IC.
  • Page 56 TP CHASSIS / TELEVISION IC612, IC-SMD LNBH23LQTR QFN32 T&R This integrated circuit adjusts LNB voltage according to the data received from IC through I2C line. High band-low band, vertical-horizontal selection, DiSEqC selection are all done according to the data this integrated circuit sends to LNB. Leg 13 produces 22kHz which is DiSEqC communication frequency.
  • Page 57 TP CHASSIS / TELEVISION power. As 12V power is only used to feed this integrated circuit in satellite module and as "Enable" signal when generating 3.3V, we may estimate that any error in 12V will affect this IC. IC302, IC-SMD IP101ALF LQFP48 TRY, Ethernet Processor: It is the driver IC of the port that ensures ethernet communication.
  • Page 58 TP CHASSIS / TELEVISION It is the linear regulator IC that provides supply for Ethernet IC. Max 200mA current is drawn from IC308. IC402, IC-SMD AP2171WG-7 SOT23-5 T&R, PCMCIA Current Limiting It is the integrated circuit that switches VCC-PCMCIA supply voltage and limits the current to 1A.
  • Page 59 TP CHASSIS / TELEVISION It is the step down converter that switches 1.5V from 5V. 1.5V is used for DDR RAM supplies. Max 1100 mA current is drawn from IC600. IC602, IC-SMD XC6221A252GR-G USP-4 T&R, VCC2V5 Linear Regulator It is the linear regulator to obtain 2.5V from 3.3V. VCC2V5 is used in DVB-T2 demodulator and main IC supplies.
  • Page 60 TP CHASSIS / TELEVISION VCC5V3_FE is made from VCC12V supply. For tuner, max 300 mA is drawn from IC603. IC604, IC-SMD TPS54226RGTR QFN T&R, 1V25 Step-Down Converter September 2011...
  • Page 61 TP CHASSIS / TELEVISION The IC with 5V input has 1.25V output voltage. It is used in VCC1V25 DVB-T2 demodulator and 100 Hz Ursa integrated circuit. Max 1150 mA current is drawn from IC604. IC605, IC-SMD TPS54226RGTR QFN T&R, VCC3V3_ST Step Down Converter IC605 is the step-down converter that creates VCC3V3_ST voltage from 5V2_ST voltage.
  • Page 62 TP CHASSIS / TELEVISION IC606 is the step down converter that creates 5V_USB supply voltage for USBs from VCC12V voltage. Max 2000mA current is drawn from IC606. IC607, IC-SMD AP2151WG-7 SOT23-5 T&R, USB driver IC IC607 is the USB driver and current limiting IC. The current drawn from this IC is limited to 1000 mA.
  • Page 63 TP CHASSIS / TELEVISION IC608 is the step-down regulator IC which obtains 1.05V voltage from 5V for main IC supply. Typically, 160 mA current is drawn from this IC. IC609, IC-SMD AP2171WG-7 SOT23-5 T&R, USB Driver IC (Rear USB) IC609 serves as current limiting and supply integrated circuit for USB. 1000 mA nominal current can be drawn from this integrated circuit.
  • Page 64 TP CHASSIS / TELEVISION IC610 is an optional Internal USB driver integrated circuit. This integrated circuit limits the current to 1000 mA. This integrated circuit is placed in the products with Wi- fi feature. IC614, IC-SMD USB2412-DZK-TR QFN28 T&R It is Internal WI-FI driver integrated circuit. IC700,IC701,IC703,IC704, IC-SMD CAT24C02TDI-GT3A TSOT23-5 T&R September 2011...
  • Page 65 TP CHASSIS / TELEVISION September 2011...
  • Page 66 TP CHASSIS / TELEVISION EEPROMs contain information related to the ports which are used for video and audio inputs. For instance, they may contain resolution information of the system. EEPROMs used in the positions of IC700, IC701, IC703 and IC704 are also used for the inputs of HDMI1, 2, 3 and HDMI4.
  • Page 67 TP CHASSIS / TELEVISION also inserted together with this integrated circuit. 100Hz integrated circuit multiplies 50Hz LVDS data that it receives from main IC to 100Hz; also processes it through MEMC (motion estimation and motion compensation) algorithms and sends the picture to the panel as double LVDS output.
  • Page 68 TP CHASSIS / TELEVISION It is the flash of 100 Hz integrated circuit. IC802(OPS), IC-SMD W25Q80BVSSIG IC802 is placed in the circuit as optional to URSA flash in IC804 position. IC900, IC-SMD MAX9728AETC+ T&R IC900 is the audio amplifier used to strengthen scart audio output signal. IC901, IC-SMD CAT24C02TDI-GT3A TSOT23-5 T&R September 2011...
  • Page 69 TP CHASSIS / TELEVISION When VGA cable of the computer is connected to TP chassis, VGA EEPROM at position IC901 contains the information about the supported picture format. The broadcasts other than this resolution (for example 720P) may not be shown. Besides, IC901 contains EDID DATA information where resolution data of TV and PC connected from VGA input are compared.
  • Page 70 TP CHASSIS / TELEVISION TP chassis utilizes hybrid tuner. Receiving both analog and digital broadcasts from the cable, the tuner obtains analog and digital IF (inter frequency signals) of the broadcasts. This ALPS brand tuner uses 5V power as antenna supply for active antennas.

  • Page 71: Service Menu Settings

    To enter service menu, just like in the previously launched products, we press menu button of the remote control and enter 9, 3, 0, 1 in sequence for BEKO/ARÇELİK brand TVs. For GRUNDIG brand we enter 8, 5, 0, 0. As the chassis improvement and development works go on throughout the production, service menu items may vary according to the software version.
  • Page 72 BLUE BACK enables us to determine background when there is no picture on the screen. When "On" is selected, background will be blue; and when "Off" is selected background will be black or snowing. “On” should be selected in GRUNDIG brand products and “Off” in other products.
  • Page 73 TP CHASSIS / TELEVISION CI KEY VERIFY indicates if CI Key was installed or not. This menu cannot be changed. This option should appear as “Pass” in the products with CI Plus feature. CI Key is the keyword on the card which is inserted to decrypt the broadcasting. This menu is a control indicator and changes automatically.
  • Page 74 It should be selected in other products according to the customer’s demand. OSD SELECTION menu has "Grundig", "Beko", "Arçelik" and "OEM" selection. For Grundig products, “Grundig” is selected. This selection adds Grundig next to the user menu and remote control selection is "TP3". In Grundig 3D products, remote control can be select TP3, TP3_3D, TP7, TP8 and TP9 depending on enclosure type and product specifications.
  • Page 75 TP CHASSIS / TELEVISION viewed under the menu. Selection of remote control may vary according to the customer demand. KEYPAD enables you to select keypad according to the mechanical structure of the product. 4-Key, 6-key, single-key and “Joystick” options are available. If selected wrong, the keys will work in different functions.
  • Page 76 TP CHASSIS / TELEVISION HIDEV MONO (improvement of high audio deviation), is a feature developed to prevent imbalances that may occur on sound carrier signals due to high audio deviation in the country. It is ON for domestic products and OFF for the products sold abroad.
  • Page 77 TP CHASSIS / TELEVISION place, this option should NOT be cloned. User Set enables us to transfer user settings (sound, brightness, TV language and etc.). Start Cloning option starts the cloning process. Whereas TV to USB takes little time, USB to TV causes a short interruption of TV imaging. When TV automatically restarts after installation, its means cloning is completed.
  • Page 78 TP CHASSIS / TELEVISION Step 4: Open service menu (MENU+8500 (Grundig)). Step 5: In Service menu, select Boot Code Configuration and press OK. Step 6: If there is no problem, TV will automatically turn off and restart with new bootloader. If there is a problem, TV will not automatically restart.
  • Page 79 TP CHASSIS / TELEVISION SRS HD STANDARD STANDARD 3D TV OPTIONAL DLNA Wifi STANDARD Internet TV STANDARD Dolby Digital Plus STANDARD Divx+ HD STANDARD Picture Perfect Plus 50 Hz panel 100 Hz 100 Hz HD ready LED panel or 100 Hz LCD panel 200 Hz 200 Hz HD ready LED panel or 200 Hz LCD panel September 2011...
  • Page 80 TP CHASSIS / TELEVISION HD 100 Hz 1080p 100 Hz Full HD LED panel HD 200 Hz 1080p 200 Hz Full HD LED panel LCD HD Ready panel HD 1080p LCD Full HD panel LED TV LED panel USB Recording STANDARD Connectivity STANDARD...
  • Page 81 TP CHASSIS / TELEVISION DVB T2+C OPTIONAL HD Triple Tuner STANDARD HD Triple Tuner OPTIONAL APPROVED LOGOS: The logos below are displayed if approved by test results. Cable Ready YouSee Ziggo MediaSet France HD Comhem Spain TDT Stofa September 2011...

  • Page 82: Customer Settings

    TP CHASSIS / TELEVISION Boxer Riks TV Canal Digital TNT HD Antenna HD Ready Levira Other Menus: Other menus are closed to authorized services as they are used for R&D studies in the factory. 10. CUSTOMER SETTINGS In TP-chassis products, many features are selected ON as a standard. In the tables, blue coloured features are optional whereas other features are written on the flash IC of the related group products as a standard via factory automation command.
  • Page 83 Not to be set (OFF) Not to be set (ON) STD. Not to be set (ON) STD. BLUEBACK To be set (VTF) (GRUNDIGıON; DİĞERıOFF) OPT. HOTEL To be set (VTF) (SIMPLE OTELTV) OPT. CI KEY VERIFY Not to be set (Success) PLUG PLAY and then SUCCESS (CI+ISTD.

  • Page 84: Failure/Error Codes

    TP CHASSIS / TELEVISION 11. FAILURE/ERROR CODES 11.1. Sound but no picture, and backlight illuminated In this section, we will basically explain where we need to check if there is "no picture on TV" even though there are not any problems in the panel inverter. Here, we are assuming that chassis is generally in good condition as we obtain sound output from TV.

  • Page 85: Sound But No Picture, And Backlight Not Illuminated

    TP CHASSIS / TELEVISION If LVDS data leaves URSA in a proper way, the problem is likely to be originated from the panel. Besides, you can also consider problems including that LVDS data is not being transmitted to the panel properly, wrong panel EEPROM or software error. You can solve the problem by installing correct software.
  • Page 86 TP CHASSIS / TELEVISION there is a problem on the main integrated circuit. If signals are detected, you should check IC500 and peripheral components against problems, and check IC500 supply and whether MUTE is pressed on. Besides, scart output of TV should be checked for sound. If there is no sound in scart output, power supply of the integrated circuit at position IC900 and peripheral components, and at IC900 input, the availability of AU_DAC0_L and AU_DAC0_R signals sent by main integrated circuit should be checked.

  • Page 87: Failure Flow/Troubleshooting Diagrams

    TP CHASSIS / TELEVISION 12. FAILURE FLOW/TROUBLESHOOTING DIAGRAMS 12.1. Sound but no picture, and backlight illuminated September 2011...

  • Page 88: Sound But No Picture, And Backlight Not Illuminated

    TP CHASSIS / TELEVISION 12.2. Sound but no picture, and backlight not illuminated September 2011...

  • Page 89: No Sound

    TP CHASSIS / TELEVISION 12.3. No Sound September 2011...

  • Page 90: Chassis Diagrams

    TP CHASSIS / TELEVISION 13. CHASSIS DIAGRAMS September 2011...
  • Page 91 TP CHASSIS / TELEVISION September 2011...
  • Page 92 TP CHASSIS / TELEVISION September 2011...
  • Page 93 TP CHASSIS / TELEVISION September 2011...
  • Page 94 TP CHASSIS / TELEVISION September 2011...
  • Page 95 TP CHASSIS / TELEVISION September 2011...
  • Page 96 TP CHASSIS / TELEVISION September 2011...
  • Page 97 TP CHASSIS / TELEVISION September 2011...
  • Page 98 TP CHASSIS / TELEVISION September 2011...
  • Page 99 TP CHASSIS / TELEVISION September 2011...
  • Page 100 TP CHASSIS / TELEVISION September 2011...
  • Page 101 TP CHASSIS / TELEVISION September 2011...

  • Page 102: Software Update

    TP CHASSIS / TELEVISION 14. SOFTWARE UPDATE 14.1. Updating TV Software via USB Memory To update TV software by means of USB memory, we will use Target folder available in the system according to product code. First, copy Target folder to USB main directory. Before starting installation, you should check script and panel files in the Target folder which will be installed.

  • Page 103: Boot Code Installation From Service Menu Via Usb Memory

    TP CHASSIS / TELEVISION Panel folder contains panel software. Ursa folder is only included in 100Hz panels and contains 100Hz software. As all panels are 100Hz or 200Hz in TP-Chassis products, all folders contain URSA folder in TP. There are not any critical control elements for other folders. Shut down TV before inserting USB to TV for software update.

  • Page 104: Mboot Installation Via Debug Tool

    TP CHASSIS / TELEVISION USB memory is inserted to TV and TV turns on (without pressing any key), service menu is opened from the TV. (After entering the menu, type 8500 for GRUNDIG brand products and 9301 for others) In Service menu, go to "Boot Code Configuration" menu. (Press green button in service menu or OK on Boot Code Configuration tab) In “Boot Code Configuration”...
  • Page 105 TP CHASSIS / TELEVISION MBoot can be loaded over VGA Input. USB port is used for PC connection. To load MBoot on TV, VGA cable is connected to VGA connector that is in the opposite of USB connector. Software installation adapter has a key. This key enables you to select the pin configuration (pin: 11,4), the key should be positioned on the USB connector side.
  • Page 106 TP CHASSIS / TELEVISION To be able to use ISP Utility program, MStar Debug Tool's driver should have been loaded on the PC. ISP Utility is copied anywhere on the computer and ISP_Tool v4.5.2.8.SP.exe application is executed. When executed for the first time, the program is opened as shown below. Settings should be selected as in the figure.
  • Page 107 TP CHASSIS / TELEVISION After selecting software (*.bin) to be installed, press AUTO button. In standard use, the following options are recommended. After completing the settings, please press "Dis Con" button of the program interface, then turn TV Power Off/On, press "Connect" button within 1-2 seconds. In this way, TV goes to ISP mode.
  • Page 108 TP CHASSIS / TELEVISION and re-install software. If this does not work, we should try to install software using another USB memory. On the chassis, there might be a problem arising from components or soldering. On the PC, there might be problem arising from USB hardware or driver. The latest version of ISP Utility should be used.

  • Page 109: Supported Resolutions

    TP CHASSIS / TELEVISION 15. SUPPORTED RESOLUTIONS 15.1.PC-DVI Resolution Info Resolutions that can be used with computer connection: 15.2. HDMI-H PC Resolution Info September 2011...

  • Page 110: Hdmi-H Ypbpr Resolution Info

    TP CHASSIS / TELEVISION 15.3. HDMI-H YPbPr Resolution Info Resolutions 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 24fps 1080p 25fps 1080p 30fps 1080p 50Hz 1080p 60Hz September 2011...

  • Page 111: Hotel Tv Setup

    TP CHASSIS / TELEVISION 16. HOTEL TV SETUP Under Factory Settings – System Configuration, “Hotel TV” selection should be “On” to ensure hotel usage. Hotel TV is intended to prevent hotel guests from changing TV’s channel settings and turning volume up to disturbing levels for the environment. Therefore, “Source Settings”...
  • Page 112 TP CHASSIS / TELEVISION Cloner Menu will be displayed by using password “4,6,5,8” on "Menu/Source Setup/Program Table". With such authorization, we can perform channel tuning (Source Setup menu), maximum initial sound volume settings and whether TV will stay on Stand-By or directly switch on when plugged in (Hotel TV Settings menu). This feature turns off after TV is switched to Stand-By.

  • Page 113: Tp Chassis Digiturk Enabled Tv Setup

    TP CHASSIS / TELEVISION 17. TP CHASSIS DIGITURK ENABLED TV SETUP Our TP-chassis digital broadcasting enabled televisions are launched together with Digiturk membership package according to the agreement entered with Digiturk. In our TVs, Digiturk mode will run over Eutelsat 7.0° satellite. NOTE: Please refer to TP-Training Manual for detailed technical specifications of our TP televisions and contact the dealers for the circular containing details of TP- Digiturk campaign.
  • Page 114 TP CHASSIS / TELEVISION Once the module is inserted, module verification process starts. In this case, warning menus appear on TV. On “CA – Module” menu, we should see “Irdeto Access” message. After selecting CA – Module => Irdeto CA Status => Digital Card Status, we should see serial number of the Smart card as well as "Card Inserted"...
  • Page 115 TP CHASSIS / TELEVISION Continue with the setup after these checks. Later, you should call Digiturk to activate the membership. Please have the password envelope with you for this call. After setup is completed, “Digiturk Agreement” that comes with the product will be filled in.
  • Page 116 TP CHASSIS / TELEVISION After selecting CA – Module => Irdeto CA Status => Digital Card Status, we should see serial number of the Smart card as well as "Card Inserted" message in "Status" tab. If the card is inserted incorrectly or if it is broken, the information on this menu may be missing.

  • Page 117: Missing Channels On The Products With Satellite Receiver

    TP CHASSIS / TELEVISION If the problem is not solved after these checks, make sure the problem does not rest in the broadcast. Call Digiturk customer services to check CAM number (starting with OAF) and card number and have them verified. Ask Digiturk customer services to reset all signals coming to this module.

  • Page 118: Significant Oscilloscope Outputs

    TP CHASSIS / TELEVISION 19. SIGNIFICANT OSCILLOSCOPE OUTPUTS September 2011...
  • Page 119 TP CHASSIS / TELEVISION September 2011...
  • Page 120 TP CHASSIS / TELEVISION September 2011...
  • Page 121 DVB T/C/T2* TF+ (S13+) System Block Diagram (DVB T/C/S2/T2) V_SAW S_SAW Tuner - ALPS I2C address at C0 Enable Video_Interface DDR3_ 32bit HDMI DVBT2 900_Video_Interface.SchDoc 800_FRC.SchDoc 200_DDR3_ 32bit.SchDoc 700_HDMI.SchDoc 300_DVBT2.SchDoc +12V VCC5V_USB VCC5V_USB DC/DC VCC3.3V VCC1V25 Enable VCC5V POWER_LVDS CI_PCMCIA Audio Amp MSD3819TX DVB_T/S2...
  • Page 125                                                       SAFETY PRECAUTIONS  1. Always use the manufacturer’s replacement safety components. 2. The critical safety components marked with on the schematics diagrams should not be by other substitutes. Other substitute may create the electrical shock , fire or other hazards. Take attention to replace the spacers with the originals.
  • Page 126                                                       SAFETY PRECAUTIONS  LCD and LED panels used in TVs with panels from electrical and physical terms is very sensitive. Below article should therefore be considered: 1. Be careful not to make scratch on the polarizer. Surface of polarizer is soft and can be physically damaged easily. Please do not touch, push or rub polarizer surface with materials over HB hardness.
  • Page 127 Software Installation Guide for Project TP 1. Bootloader Loading a. Bootloader loading from USB If there is software already on the TV, version of this software must be at least V01.008.00 to use this feature! Initial Conditions: TV will be open. Step 1: The software package supplied in the bootloader binary folder’s (eg.
  • Page 128 Bootloader Installation with ISP Tool Initial Conditions: In case of power on the TV. (It does not matter whether the image on the screen.) Step 1: MStar ISP tool device should be connected the TV’s VGA input and PC’s USB port. (There is the need to download driver for this device for Windows XP.
  • Page 129 Step 3: Press the “Connect” button to connect ISP Tool with TV’s SPI Flash. Make sure that the program can connect the SPI Flash. (If connecting becomes successful, a small box opens and “Device Type is Winb25Q16” message appears on the form. Now (16.02.2011) at the project of TF SPI Flash is Winbond.
  • Page 130 Step 5: Running on the PC, on the ISP Tool.exe, press “Auto” button and make sure that All Chip, Blank, Program, Verify, and Exit ISP options are selected. Step 6: Press “Run button” in the Auto page, and Wait until the “PASS” message, on the right side of the “Run”...
  • Page 131 Step 1: In the software package supplied in the Target folder, copy into the USB memory. Step 2: Insert the USB memory to the USB port that is located side of the TV. Step 3: Holding down any key on the keypad with your finger (not releasing the key), cut power of TV and re-issued it again.
  • Page 132 FlowControl: None Step 4: TV power off changed to power on. Within 1 second, immediately with pressing PC’s “ENTER” key, TV’s drop to the console is provided. Step 5: In the console; << MStar >># usb start 1 is entered. In the console, the statement is written about the presence of plugged memory.
  • Page 133 Step 1: In the software package, desired panel file in the RELEASED_PANEL_FILES folder is copied under the Target/BEKO_BIN_FILES/panel folder and file’s name is changed as “PANEL.bin”. Step 2: Given in the software package Target folder is copied into the USB memory. Step 3: Insert the USB memory to the USB port that is located side of the TV.
  • Page 134 is entered. In the console, the statement is written about the presence of plugged memory. Step 7: In the console with entering; << MStar >># ustar [[eprom_panel loading is started .(2K) Step 8: After installation is completed in the console, <<...
  • Page 135 Step 2: Given in the software package Target folder is copied into the USB memory. Step 3: Insert the USB memory to the USB port that is located side of the TV. Step 4: After MStar ISP tool connects to the TV, a terminal control program, such as minicom or hyperterminal, is executed.
  • Page 136 In the console, the statement is written about the presence of plugged memory. Step 7: In the console with entering; << MStar >># ustar [[eprom_all loading is started.(4K) Step 8: After installation is completed in the console, << MStar >># re is entered or directly with making power off-on to the TV, opening TV is provided.
  • Page 137 << MStar >># ustar [[eprom_gamma loading is started. Step 3: After installation is completed in the console, << MStar >># re is entered or directly with making power off-on to the TV, opening TV is provided. 4. Loading HDCP Key Step 1: In the software package, panel file in the RELEASED_PANEL_FILES folder HDCP.bin is copied under the Target/BEKO_BIN_FILES/panel folder.
  • Page 138 << MStar >># re is entered or directly with making power off-on to the TV, opening TV is provided. 5. Loading URSA Step 1: In the software package, panel file in the RELEASED_PANEL_FILES folder ursa.bin is copied under the Target/BEKO_BIN_FILES/panel folder. Step 2: Until Step 7, steps followed to Panel.bin also followed for ursa.bin.
  • Page 139 SERVICE BULLETIN ELECTRONICS PLANT 04.07.2011 DATE BULLETIN ELK-11/27 CHASSIS All TV sets with DVB-S Satellite L connector information SUBJECT PROBLEM Satellite cable is getting out of the TV set and moves the TV set away from the wall or satellite cable input is too deep to plug the cable. The satellite cable is touching the wall which leads to customer dissatisfaction.
  • Page 140 SUBJECT PROBLEM When facebook application is used for the first time, you have to go to a webpage (tv.grundig.com/fb/) from your PC to enter a validation code to the TV set. After entering this code, you can access facebook. However, in the SW versions V01.22, V01.28 and V01.31, this address is written as “tv.grundig.com/fb”...
  • Page 141 SERVICE BULLETIN ELECTRONICS PLANT DATE 25.01.2012 BULLETIN ELK_12_02 CHASSIS SUBJECT 2D/3D conversion performance of the products with 3D-100Hz PROBLEM While converting a non-3D broadcast to 3D, some letters on the screen may be shown scattered and 3D perception is limited. SOLUTION Please refer to the following instructions: 1.
  • Page 142 TV can start to work again by updating the software with a special version. Please download this special software from and update the http://www.grundig.de/software/tv.html TV set by USB using usual SW Update Procedure. Note that update of this special SW may take longer than a usual SW update.
  • Page 143 Second of all, some digital channels will be added and some will change broadcasting transponder. Below, you can find the precautions for chassis SX, TX, TF and TP Arçelik and Grundig have taken for our customers to have minimum dissatisfaction due to this change.
  • Page 144 2. The end users have to upload a clone file Grundig will prepare which includes the program table for all Astra channels.  First of all, the end user have to find out the chassis in his/her TV set. o The user can have a look at it from User Menu  Settings  SW Version screen.
  • Page 145 After making the adjustments like in the picture, the user shall press to the red button to clone the program list. After cloning the list, the user is going to have the program table that Grundig have prepared. The end user shall not make another automatic search.
  • Page 146 SERVICE BULLETIN ELECTRONICS PLANT DATE 19.04.2012 BULLETIN ELK_12_16_EN CHASSIS SUBJECT 3D doesn’t work PROBLEM With TP chassis 3D products, 3D feature is not working which is caused by VSF170 / VTV170 / VTZ170 coded 3D emmiter modules SOLUTION In 3D emmiter module, please replace the component at D1 position with: 302334R LED 5MM 850NM INFRARED 1.5V Best Regards,...
  • Page 147 SERVICE BULLETIN ELECTRONICS PLANT DATE 19.04.2012 BULLETIN ELK_12_17_EN CHASSIS SUBJECT Interference in DVB-T while wi-fi dongle is connected PROBLEM In 55” TP chassis and aluminium cabinet products, an interference may occur in DVB-T channels after connecting the external wi-fi dongle. SOLUTION Please follow the steps below: 1.
  • Page 148 SERVICE BULLETIN ELECTRONICS PLANT DATE 15.05.2012 BULLETIN ELK_12_21_EN CHASSIS No connection on YouTube Application SUBJECT PROBLEM In the products with TP chassis, altough there is the Internet connection, there is no connection to YouTube application. Besides, other Interactive TV applications are properly connected and succeeded in operating.
  • Page 149 SERVICE BULLETIN ELECTRONICS PLANT DATE 31.07.2012 BULLETIN ELK_12_27_EN CHASSIS SUBJECT TV goes to stand-by when pressed MUTE button on the RC PROBLEM When frequently pushing a button (especially MUTE button) on the remote control, in some cases related with the existence of the electronic devices in medium, there may occur of changing over of the TV from ON mode into Stand-By mode.
  • Page 150 SERVICE BULLETIN ELECTRONICS PLANT DATE 21.12.2012 BULLETIN ELK_12_35_EN CHASSIS Losing channel list after USB cloning SUBJECT PROBLEM Cloning the channel list on the products with SW version older than TPGRMR.-.-.-.- .V05.004.00 and using it on the products whose SW version is TPGRMR.-.-.-.- .V05.004.00 / newer one leads to deletion of channel list.
  • Page 151 SERVICE BULLETIN ELECTRONICS PLANT 02.01.2013 DATE BULLETIN ELK_13_01_EN SX, TP CHASSIS Change in woofer box in SX, TP products with built-in subwoofer SUBJECT PROBLEM Due to a modification in built-in subwoofer box, the part number has also been changed. Recently ordered subwoofer boxes will not be compatible with existing woofer cables on the TV set.
  • Page 152 SERVICE BULLETIN ELECTRONICS PLANT 16.01.2013 DATE BULLETIN TP_13_02_EN CHASSIS Change in FAV-list behaviour SUBJECT PROBLEM While skipping channels on Favorite List, using P+ / P- buttons on the remote controller makes the TV switch to a different channel, which is not on the FAV-list. CAUSE Effective from software version 04.004.00, P+ / P- buttons changes channels on main list (until version 05.005.00).
  • Page 153 Step-1: While watching a channel which is on FAV-list, end user presses P+ or P- button on the remote. This launches FAV-list popup. Step-2: On the FAV-list, desired channel could be selected using navigation buttons on the remote. Step-3: TV will switch to the selected channel by pressing “OK” button on the remote.
  • Page 154 SERVICE BULLETIN ELECTRONICS PLANT 17.01.2013 DATE BULLETIN ELK_13_03_EN TP Chassis CHASSIS Connecting trouble with Reuters Application SUBJECT PROBLEM Due to application change, Reuters application will not be accessible. SOLUTION With the next online SW update, Reuters application will be removed and more extensive Euronews application will take place.
  • Page 155 1. ACCEPTABILITY BASED ON IPC 600G CLASS 2 2. REFER TO BOARD STACK UP FOR THE LATIMATE MATERIAL AND THE CORRESPONDING THICKNESS AND THE TARGET IMPEDANCE. 3. THE TRANSMISSTION LINE IMPEDANCE SHOULD BE WELL CONTROLLED THE IMPEDANCE SHALL BE MEASURED WITH TIME DOMAIN REFLECTO- METER(TDR) EQUIPMENTS, IMPEDANCE REPORT SHOULD BE SUBMIT.
  • Page 156 TP257 TP21 TP259 TP13...
  • Page 157 THIS DRAWING CONTAINS TOP VIEW ! INFORMATION WHICH IS THE PROJECT NAME TP PROJECT PROPRIETARY PROPERTY OF ARCELIK A.S. THIS DRAWING IS RECEIVED PCB CODE VSF190R-2 01.07.2011 IN CONFIDENCE AND ITS CONTENTS MAY NOT BE ARCELIK A.S. DISCLOSED WITHOUT THE LAYER INFO TOP LAYER PRIOR WRITTEN CONSENT OF...
  • Page 158 THIS DRAWING CONTAINS TOP VIEW ! INFORMATION WHICH IS THE PROJECT NAME TP PROJECT PROPRIETARY PROPERTY OF ARCELIK A.S. THIS DRAWING IS RECEIVED PCB CODE VSF190R-2 01.07.2011 IN CONFIDENCE AND ITS CONTENTS MAY NOT BE ARCELIK A.S. DISCLOSED WITHOUT THE LAYER INFO MIDLAYER1 PRIOR WRITTEN CONSENT OF...
  • Page 159 THIS DRAWING CONTAINS TOP VIEW ! INFORMATION WHICH IS THE PROJECT NAME TP PROJECT PROPRIETARY PROPERTY OF ARCELIK A.S. THIS DRAWING IS RECEIVED PCB CODE VSF190R-2 01.07.2011 IN CONFIDENCE AND ITS CONTENTS MAY NOT BE ARCELIK A.S. DISCLOSED WITHOUT THE LAYER INFO MIDLAYER2 PRIOR WRITTEN CONSENT OF...
  • Page 160 THIS DRAWING CONTAINS TOP VIEW ! INFORMATION WHICH IS THE PROJECT NAME TP PROJECT PROPRIETARY PROPERTY OF ARCELIK A.S. THIS DRAWING IS RECEIVED PCB CODE VSF190R-2 01.07.2011 IN CONFIDENCE AND ITS CONTENTS MAY NOT BE ARCELIK A.S. DISCLOSED WITHOUT THE LAYER INFO BOTTOM LAYER PRIOR WRITTEN CONSENT OF...
  • Page 161 VCC1V05 IC100F VDDC USB Block VDDC IC100D VDDC USB0_P USB0_P ET_MDC-E ET_MDC/GPIO172 VDDC USB0_N USB0_N ET_MDIO-E USB1_N ET_MDIO/GPIO173 VDDC USB1_N ET_TX_CLK-E USB1_P ET_REFCLK/GPIO169 VDDC USB1_P ET_TX_EN-E ET_TXEN/GPIO168 VDDC IC100C ET_TXD0-E AUDIO ET_TXD0/GPIO167 VDDC ET_TXD1-E ET_TXD1/GPIO166 VDDC CLOCK/3D_Tx +5V2_ST Video Block ET_COL-E ET_CRS/GPIO165 VDDC...
  • Page 162 R200 DDR1V5 DDR15V_B L200 1K 1% A-VREFCA VCC1V5 DDR15V_A DDR1V5 VCC1V5 300@100 TP15 TP16 TP17 C200 C201 C202 C203 C204 C205 100nF 100nF 100nF 100nF C206 C207 C208 C209 C210 C211 C212 C213 C214 C215 C216 C222 R201 10uF 100nF 100nF 100nF 100nF...
  • Page 163 max 120mA IC300 L408 XC6221A252GR-G 2V5A VCC1V05 VDD_1V0 SBY1005 L320 L321 VDD_1V0 VDD_1V0 VCC3V3 VCC3V3 Vın Vout VDD_1V0 FB/60R/2A TP21 TP22 TP23 C399 C428 C429 C448 C449 C450 C451 C452 C453 C454 C430 C431 C432 C433 C434 C306 C307 C313 C435 C436 C437...
  • Page 164 5V_T R400 T400 NC/BC848B TU400 RFAGCM TDAG8-D11A R450 RF_MON 7 5 3 1 RF_MON R401 100k C400 R402 100nF 8 6 4 2 220K L400 5V_T SBY1005 C401 VCC3V3 100nF R403 R404 2.2K R405 6.8K D400 R406 BA591 SIF_P SIF_P TP40 DIF1_T_N R407...
  • Page 165 C500 IC500 +Aud_Vcc MAX9728A TP49 C501 C502 R500 R501 EAR_OUT_L C503 470n EAR_OUT_L S500 RIGHT Right PVss R502 R539 LEFT Left OutL EAR_OUT_R C504 470n TP50 EAR_OUT_R OutR C505 TP51 Headphone R503 C506 R504 22nF C507 220k 2.2n 2.2n TP52 D500 220k PESD5V0S1BL...
  • Page 166 VCC_DDR T604 R600 L615 C670 PMV65XP VCC2V5 VCC3V3 VCC5V max 1100mA for 100Hz 1u/16v 100R L600 VCC_PANEL PANEL-VCC IC600 max 800mA for 50Hz C600 60R/100MHz TPS54226RGTR 100nF VCC1V5 max 150mA for S13+ and T2 max 700mA 300mA for Tuner R659 L601 VCC3V3-ST VCC2V5...
  • Page 167 S700 C978 R979 HDMI0_ARC HDMI0-ARC HDMI0_HPDIN HP_DETECT TP105 HDMI0_5V HDMI- ARC (option) HDMI0_5V TP106 CEC_GND HDMI0-SDA TP107 HDMI0-SCL TP108 HDMI0-ARC R700 R701 N.C. HDMI0-CEC TP109 HDMI0-CLK_N CLK- HDMI0_HPDIN GND_CLK HDMI0-CLK_P D702 CLK+ R702 HDMI0-RX0_N HDMI0-HPDIN RX0- HDMI0_5V T700 GND0 HDMI0-RX0_P BC847B RX0+ HDMI0-RX1_N...
  • Page 168 This pin will be used for ext. PWM input trough R822 See pin #4 of S804 10 Bit 4 Channel OUT(LG) 10 Bit 4 Channel OUT (SAMSUNG) HD panel IC800D MST7398R PANEL-VCC 8 bit SINGLE LVDS PANEL UVDDC VDDC 1.26V R800 VDDC 1.26V UAVDD...
  • Page 169 Full SCART C900 R900 S900 SC1_CVBS-IN SC1_CVBS-IN SCART R902 47nF C902 47nF VCOM0 VCOM0 C904 R904 TP214 SCART1-CVBS_IN (330pF) 75R %1 SC1_CVBSO TP215 R905 TP216 SC1_Rout C906 SC1-C SC1-C SC1_Lout 47nF SC1-VSYNC SC1-VSYNC TP217 SCART1_RED C907 47nF SC1-R+ SC1-R+ TP218 R907 SC1_CVBSO C909...
  • Page 170 1. ACCEPTABILITY BASED ON IPC 600G CLASS 2 2. REFER TO BOARD STACK UP FOR THE LATIMATE MATERIAL AND THE CORRESPONDING THICKNESS AND THE TARGET IMPEDANCE. 3. THE TRANSMISSTION LINE IMPEDANCE SHOULD BE WELL CONTROLLED THE IMPEDANCE SHALL BE MEASURED WITH TIME DOMAIN REFLECTO- METER(TDR) EQUIPMENTS, IMPEDANCE REPORT SHOULD BE SUBMIT.
  • Page 171 TP257 TP21 TP260 TP259 TP13 TP64...
  • Page 172 VCC1V05 IC100F VDDC USB Block VDDC IC100D VDDC USB0_P USB0_P ET_MDC-E ET_MDC/GPIO172 VDDC USB0_N USB0_N ET_MDIO-E ET_MDIO/GPIO173 VDDC USB1_N USB1_N ET_TX_CLK-E ET_REFCLK/GPIO169 VDDC USB1_P USB1_P ET_TX_EN-E ET_TXEN/GPIO168 VDDC IC100C ET_TXD0-E AUDIO ET_TXD0/GPIO167 VDDC ET_TXD1-E ET_TXD1/GPIO166 VDDC CLOCK/3D_Tx +5V2_ST Video Block ET_COL-E ET_CRS/GPIO165 VDDC...
  • Page 173 R200 DDR1V5 DDR15V_B L200 1K 1% A-VREFCA VCC1V5 DDR15V_A DDR1V5 VCC1V5 300@100 TP15 TP16 TP17 C200 C201 C202 C203 C204 C205 100nF 100nF 100nF 100nF C206 C207 C208 C209 C210 C211 C212 C213 C214 C215 C216 C222 R201 10uF 100nF 100nF 100nF 100nF...
  • Page 174 max 120mA IC300 L408 2V5A VCC1V05 VDD_1V0 XC6221A252GR-G SBY1005 L320 L321 VDD_1V0 VDD_1V0 VCC3V3 VCC3V3 Vın Vout VDD_1V0 FB/60R/2A TP22 TP23 C399 C428 C429 C448 C449 C450 C451 C452 C453 C454 C430 C431 C432 C433 C434 C306 C307 C313 C435 C436 C437 C438...
  • Page 175 TU400 TDAG8-D11A R450 7 5 3 1 8 6 4 2 5V_T VCC3V3 R400 T400 RFAGCM NC/BC848B R405 RF_MON RF_MON R401 TP40 DIF1_T_N 100k C400 DIF1_T_N DVBT2 DIF1_T_P DIF1_T_P R402 100nF 5V_T L402 R409 100R D_IF_P 220K D_IF+ TP42 R411 100R D_IF_N VCC5V...
  • Page 176 C500 IC500 TP49 +Aud_Vcc MAX9728A C501 C502 R500 R501 EAR_OUT_L C503 470n EAR_OUT_L S500 RIGHT Right PVss TP50 R502 R539 LEFT Left OutL EAR_OUT_R C504 470n EAR_OUT_R OutR C505 TP51 Headphone R503 C506 R504 22nF C507 220k TP52 2.2n 2.2n D500 220k PESD5V0S1BL...
  • Page 177 L617 NC/120R/100MHz VCC5V3_FE VCC5V VCC5V3_FE C681 IC615 max 500mA L618 L619 120R/100MHz TPS54226RGTR VCC5V3_FE 100n NR4018T3R3M VCC12V VIN1 VBST C682 10uF 10V VIN2 TP64 C683 10uF 16V VCC3V3 VREG5 R671 C684 R672 PGND2 15.4K %1 C685 4.7K PGND1 10uF 10V R673 R674 C686...
  • Page 178 S700 C978 R979 HDMI0_ARC HDMI0-ARC TP105 HDMI0_HPDIN HP_DETECT TP106 HDMI0_5V HDMI- ARC (option) HDMI0_5V CEC_GND HDMI0-SDA TP107 TP108 HDMI0-SCL TP109 HDMI0-ARC R700 R701 N.C. HDMI0-CEC HDMI0-CLK_N CLK- HDMI0_HPDIN GND_CLK HDMI0-CLK_P D702 CLK+ R702 HDMI0-RX0_N HDMI0-HPDIN RX0- HDMI0_5V T700 GND0 HDMI0-RX0_P BC847B RX0+ HDMI0-RX1_N...
  • Page 179 TP212 R5_RXO1+ DDR3_A3/DDR2_A10 DDR2_DQ14/DDR3_DQ11 LABEL2 AD23 R2_RXO2- RXO-2_N RP820 RXO2_N RP814 A2_N DDR3_BA2/DDR2_A1 DDR2_DQM1/DDR3_DQ15 DQU7 FID1 FID2 FID3 FID4 R859 AE23 GRUNDIG RXO-2_P RXO2_P A2_P DQU1 10K/NC R3_RXO2+ DDR3_BA0/DDR2_BA2 DDR2_DQM0/DDR3_DQ9 AD22 RXO-C_N RXOC_N ACK_N DQSL_P TP213 R0_RXOC- DDR2_DQS0/DDR3_DQS0 AE22 RXO-C_P...
  • Page 180 Full SCART C900 S900 R900 SC1_CVBS-IN SC1_CVBS-IN SCART R902 47nF TP214 C902 47nF VCOM0 VCOM0 C904 R904 TP215 SCART1-CVBS_IN (330pF) 75R %1 TP216 SC1_CVBSO R905 SC1_Rout C906 SC1-C SC1-C SC1_Lout 47nF TP217 SC1-VSYNC SC1-VSYNC TP218 SCART1_RED C907 47nF SC1-R+ SC1-R+ R907 SC1_CVBSO C909...

Table of Contents

Save PDF