Deleting List Of Connections; Troubleshooting - Silvercrest SBKN 4.0 A1 User Manual And Service Information

SilverCrest SBKN 4.0 A1

Deleting list of connections

The headphones note in a list of connections the last devices that were
connected. You can delete this list of connections as follows:
 Start charging as described in the section "Charging the battery".
 The LED (3) then lights up orange and thus indicates that the battery is
charging.
 Press the - l◂◂ button (4) for at least 2 seconds until the LED (3) also flashes
blue twice to confirm.
 The list of connections is then deleted. If the headphones are switched on
again, pairing mode is started automatically.

Troubleshooting

The headphones cannot be switched on.

Charge the battery.
No audio signal for Bluetooth

Switch on the headphones.

Try to connect the headphones to the device again.
The Bluetooth

Check whether the Bluetooth

The distance between the headphones and the device is too large, reduce
it.
Not all aforementioned functions are working

All aforementioned functions depend on the functionality of the device
which is used.
18 - English
®
connection is not established.
®
®
connection
function of your device is switched on.