Page 1
RANCH PERGOLA SKU #: 177510 PRODUCT MANUAL If you have any issues with the product, do not return the product back to the store For any replacement parts questions or issues about our product Call Sunjoy Customer Service 1(866) 578-6569 For further assistance, please write to us at bj@sunjoygroup.com...
IMPORTANT: Please read instructions thoroughly before assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to assure safe and proper assembly. Repeated assembly can weaken the locking ability of the washers. Periodically check all bolted connections on your Pergola to make sure they are tight and secure. Please keep the instructions for future reference.
Page 5
Insert the cross beam 1 (F) and the cross beam Fig. :Insert the assembled curve beam 2 (G) into the cross beam connector (H), and secure (C&D) to the posts (L1&L2), and connect them together using bolts (AA) ,washers (BB) and them using bolts (AA) washers (BB) and spring washer (CC).
Page 6
H19001C11 M6 Washer M6 Spring Washer M6 15 Bolt ¢8*180 P12401A01001 Stake Connect the canopy Place the canopy (R) on Fig.13: Attach the canopy to tube 1 (N) with canopy tube 2 the pergola. Then insert the the post as shown. (O) using bolts (EE),washers assembled canopy tube (N&O) (BB) and spring washer (CC).
CARE AND MAINTENANCE: Before using, clean the pergola completely with a soft dry towel. Do not put your pergola in wet conditions where there is a risk of rust developing. When not in use, store in a cool, dry area. Limited Manufacturer’s Warranty: This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for...
Need help?
Do you have a question about the 177510 and is the answer not in the manual?
Questions and answers