What You Need To Get Started - National Instruments SCC-FV01 User Manual

italic
monospace
SC-2345
SCC

What You Need to Get Started

SCC-FV01 Frequency Input Module User Guide
Italic text denotes variables, emphasis, a cross reference, or an introduction
to a key concept. This font also denotes text that is a placeholder for a word
or value that you must supply.
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames, and extensions.
SC-2345 refers to both the SC-2345 connector block and the SC-2345
configurable connector.
SCC refers to any SCC Series signal conditioning module.
To set up and use the SCC-FV01, you need the following items:
❑
SC-2345/2350 with one of the following:
– SCC-PWR01
– SCC-PWR02 and the PS01 power supply
– SCC-PWR03—requires a 7 to 42 VDC power supply
(not included)
❑
One or more SCC-FV01
❑
SCC-FV01 Frequency Input Module User Guide
❑
SC-2345/2350 User Manual, available at
❑
SCC Quick Start Guide, available at
❑
Read Me First: Safety and Radio-Frequency Interference
❑
SC-2345 Quick Reference Label
❑
68-pin E Series DAQ device, documentation, and 68-pin cable
❑
1/8 in. flathead screwdriver
❑
Numbers 1 and 2 Phillips-head screwdrivers
❑
Wire insulation strippers
❑
NI-DAQ (current version) for Windows 2000/NT/XP/Me
ni.com
2
ni.com
ni.com