Epson EasyMP EMP-1815 Quick Connection Manual page 9

Network setting "Wireless LAN" screen
Item
Connection mode
Antenna level
Wireless LAN system
ESSID
DHCP
IP address
Subnet mask
Gateway address
DNS server (primary)/
DNS server (secondary)
Network setting "Wired LAN" screen
Item
DHCP
IP address
Subnet mask
Gateway address
Set the connection mode.
Displays the electromagnetic wave strength for the wireless
LAN.
Set the same wireless LAN system as the computer's.
Displayed as "EPSON". You can change it or leave it as it is.
Set whether to use DHCP (On) or not (Off).
Enter the IP address to be assigned to the projector. The
following IP addresses are not available:
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
("x" stands for any number in the range 0 to 255.)
Enter the projector's subnet mask. The following subnet
masks are not available:
0.0.0.0, 255.255.255.255
Enter the gateway's IP address. The following IP addresses
are not available:
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
("x" stands for any number in the range 0 to 255.)
Not necessary to set.
Set whether to use DHCP (On) or not (Off).
Enter the IP address to be assigned to the projector. The
following IP addresses are not available:
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
("x" stands for any number in the range 0 to 255.)
Enter the projector's subnet mask. The following subnet
masks are not available:
0.0.0.0, 255.255.255.255
Enter the gateway's IP address. The following IP addresses
are not available:
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
("x" stands for any number in the range 0 to 255.)
Explanation
Explanation
9