Table of Contents
Advertisement
The cabinet and pedestal are packaged separately Below is a list of components and hardware you
will receive in each package
•
Pedestal
` Pedestal
` Template—guide to locate pedestal base anchors
` Rubber Pad—to be installed between concrete foundation and pedestal base
•
Cabinet
` Package Protector™ package box module
` Owner's Manual (located inside module)—includes lock information and accessory parts
` Installation Guide
NOTE: Anchors are NOT included with this product Anchoring system selection coincides with
type of installation planned and should be purchased separately Refer to "Foundation
Requirements" on p. 5 for recommendations
•
1/2" socket with ratchet 1/2" wrench
•
1/2", 3/4" and 15/16" wrench, or large Crescent wrench
•
Cordless drill with proper socket adapter(s)
•
Hammer drill with 1/2" masonry bit
•
Air tank or vacuum to remove dust from holes that are drilled in concrete
•
Hammer
•
Screwdriver or taper punch for aligning mating holes
•
Level
•
10' tape measure
•
Allen wrench
Page 4 of 8
Package Protector™ PORT Installation Guide—206653—Rev A
Hardware and Component List
Tools Suggested for Installation
www.MyPackageProtector.com
Advertisement
Table of Contents
