Rinse Aid; Display Brightness; Refill Reminders; Autoopen - Miele G 7106 Operating Instructions Manual

Settings

Rinse Aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the program.
If spots appear on dishware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
dishware:
- Decrease the rinse aid dosage.

Display brightness

You can set the display brightness to
one of 7 different levels.
32

Refill reminders

If you only ever use combination
detergent products or automatic
dispensing using Miele PowerDisks (if
available), you can turn off the refill
reminders for reactivation salt and rinse
aid if you wish.
Please make sure that if you stop
using combination detergents, you
refill the reactivation salt and rinse
aid. Switch the refill reminders back
on.

AutoOpen

In some programs the door
automatically opens slightly to assist
the drying process.
This function can be deactivated if you
wish.

Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate
countertops when you open the door
at the end of the program and the
blower is no longer running.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.