Safety Warning The product can only be installed and maintained by professionals. Installation in any damp, condensed-phase environment with inflammable and explosive gas is forbidden. When the product is being installed or maintained, the power must be switched off. You are prohibited from touching the conductive part when the product is operating.
Purpose of Use NXB-63 and NXB-63H series miniature circuit breakers are mainly used for the circuit of AC 50Hz or 60Hz with rated voltage of 240V or 415V and rated current of 63A, which provide overload and short-circuit protection and are also used as the infrequent making/breaking operation of the circuit under normal conditions.
Installation 1. Outline and installation dimensions Unit:mm 2P~4P 77.8 -1.20 -1.20 3P+N、4P 76.8 -1.20 -1.20 65.5±0.37 -0.62 1P+N、2P 42.5±0.31 -0.43 2. On-off indication Green I ON...
Page 5
3. Installation ① TH35-7.5 type mounting rail ② 4. Disassembly ② ① 5. Wiring: copper wires only Table 2 Copper wire cross-sectional area Rated current In (A) Copper wire cross-sectional area S (mm ) 16、20 40、50...
Wiring torque 2.0N·m 11mm 16mm 25mm Maintenance 1. Check the circuit breaker on a regular basis during operation; 2. After the circuit breaker cuts off the overload or short-circuit current, the fault should be eliminated before closing the circuit breaker. Table 3 Analysis and troubleshooting of common faults Symptoms Cause analysis...
Need help?
Do you have a question about the NXB-63 and is the answer not in the manual?
Questions and answers