Planning Sensor Types & Locations; Device Locations; Control Panel - GE Simon 60-875 Installation Instructions Manual

Note
The DTIM doesn't support
AVM, remote access or any
call back from the central
station. It is for reporting pur-
poses only.
Planning
Sensor Types &
Locations
Simon Security System
• Dealers - to simplify customer and account management.
• First Responders - to identify where and how to respond.
• Customers - to receive event notifications and to control their security system.
™
Dialog Telephone Interface Module (DTIM) (60-879-95R)
The DTIM is a battery operated communication link between the security system con-
trol panel and the central monitoring station. The DTIM receives radio signals from
the panel, then uses the phone line to report security system events to the central sta-
tion.
* Not investigated for use by UL.
The first step to an easy and successful installation is to decide what areas or items to
protect, which lights or appliances to operate, and the best location for the panel,
touchpad, sensors, and sirens.
Metal objects, mirrors, and metallic wallpaper can block signals sent by the wireless
sensors. Make sure there are no metal objects in the way when installing the system.
Use the planning tables in "Appendix B" to determine the appropriate Sensor Type for
the sensors you will be adding. You'll need to understand the application for each sen-
sor. For example, Keychain Touchpads are typically programmed as sensor group 01
(Portable panic), used to send an intrusion alarm to a central monitoring station. This
sensor type is instant intrusion, it does not require restoral or supervisory communica-
tion with the panel and it is active in 4 arming levels (disarm, arm doors & windows,
arm motion sensors, and arm doors/windows and motions sensors).
Recommended Sensor Groups
Device
Keychain Touchpad
ELM Keychain Touchpad
Remote Handheld Touchpad
QS1500 Keypad
Indoor Motion Sensor
Outdoor Motion Sensor
Smoke Sensor
Exterior Door
Interior Door
Window Sensor
CO Alarm
Freeze Sensor
Water Sensor
RF Electronic Thermostat
Personal Help Button
DTIM

Device Locations

Control Panel

Locate the panel where alarm sounds can be heard and is easily accessible for opera-
tion.
Do not install the panel near a window or door where it can be reached easily by an
intruder.
Recommended Sensor Group
01, 03, 06, 07
01, 03, 06, 07
01, 03, 06, 07
01, 03, 06, 07
17 (intrusion), 25 (chime)
25
26
10
14
13
34
29
38
36
01, 03
08, 36
7