Belt Part
Belt material
Velcro®
Belt fastener
A700 Holster Specifications
Belt material
Belt fastener
Using the Talkman Scanning Device Holster
A700x/A700 devices have two slots that run the length of the body. These can be used to attach
the device to a belt.
1. Put the belt on with the clip either on your right or left side.
2. Position the device so that the slots on the top and bottom align with the runners on the
clip.
3. Slide the device into the clip until you hear a click.
When you remove the device from the clip, you must apply a small amount of pressure away from
you while sliding it away from the clip.
Voice Device and Headset Hardware Reference Guide
Specification
Nylon
YKK Hook and Loop
ITW Nexus 127-3200
Nylon
Non-replacable
156